All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: 7200.11 and 7200.12 head swaping
PostPosted: July 10th, 2018, 1:43 
Offline

Joined: February 11th, 2018, 0:27
Posts: 14
Location: United States
Hi everyone,

I was curious if anyone has any info regarding head swaps on Pharoah, Brinks, Moose, etc type drives of the 7200.11 and 7200.12 variety. I am beating my head against the wall and have little to show for it. I have tried moving adaptives with the PC3K, starting over and doing it all again, and everything that I can think of. I have no problems removing the heads and placing them back in the drive.

For testing purpose I have two moose drives

ST3750330AS
PBX156-303

Same date code and matching preamp.

I pulled the heads out and put them back in with no problems, I transfer the heads and get a constant recalibration sound, 11 times. I am not sure what I am missing here, any advice on where to look next?


Top
 Profile  
 
 Post subject: Re: 7200.11 and 7200.12 head swaping
PostPosted: July 10th, 2018, 11:16 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1626
Location: Italy
What tools are you using for head swap ?
Have you tried to mount heads back on donor drive? Does donor drive work again or not?
Are you working in a clean bench?

If you have done everything properly, very likely patient drive has scratchs on SA.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 77 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group