ST500DM002 Problem

[ANYC3]

Hi there !
I have st500dm002 firmware KC45, which is not detecting in bios but spinning normally no unusual sounds. after read channels shorting i got to F3T> here is the log plz assist me what should i do ? i ,ve backup of sys file 93h 1B 35h 28h and 346.


RECOV Servo Op=0100 Resp=0005[0x00000000][0x0000B67C][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset
[0x00000000][0x0000B67C][0x0000BA10]
Trans.


Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset
[0x00000000][0x0000B67C][0x0000BA10]
Trans.
F3 T>V40
Nonresident GList 0 entries returned
Total entries available: 0
PBA Len Flags Phy Cyl Hd PhySctr SFI


Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

ASCII Diag mode

F3 T>z
Input_Command_Error

F3 T>

F3 T>V40
Nonresident GList 0 entries returned
Total entries available: 0
PBA Len Flags Phy Cyl Hd PhySctr SFI

F3 T>V4

Reassigned Sectors List
Entries: 0000, Alts: 0000, Removed: 0000, Pending: 0000

Idx LBA PBA LLLCHS of LBA PLPCHS of PBA SFI Hours Msecs S
tatus BBM Mask

F3 T>/7

F3 7>X

Head 00 Resistance 00CA
Head 01 Resistance 00ED

[nicoalbrecht]

Fucked heads to keep it simple.

[rogfanther]

If you don´t need the data, trash the drive and buy another from another brand.

If you or the owner needs the data, send it to a professional recovery . There are good people near you, and depending on the situation of the drive, it still may not be a costly recovery. If you keep messing and do something wrong, it may turn into one, though.

[ANYC3]

Thanks guyz,