All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: WD 250GB Zone allocation table Error ( Pinnacle )
PostPosted: July 20th, 2018, 14:35 
Offline
User avatar

Joined: June 19th, 2018, 4:52
Posts: 45
Location: United Kingdom
I got a 2010 WD 250GB blue WD2500AAJS that comes up with error Zone allocation table : Error and 0GB Capacity.

Drive spins up 2 twice very short 4- 5 seconds and spins down very slight click ( 2 in total ) I replaced the reading heads and same issues. Old heads work in donor surprise there.

Any idea what else to try or do. DDI comes up as 0 capacity too.


Technology mode key : ..........................: OK

RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 1
Head map : .....................................: 0
SA Cyl Count : .................................: 170
Serials Mark : .................................: 0xCB16
Control version : ..............................: 46A1

Zone allocation table : ........................: Err

ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 192 Kb
ROM version : ..................................: 05.FME
ROM generation : ...............................: 05.FME
Link table version : ...........................: 04.0K
ROM Firmware version : .........................: 000500FM

ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 0x2
Heads number in use : ..........................: 0x1
heads map : ....................................: 1


Top
 Profile  
 
 Post subject: Re: WD 250GB Zone allocation table Error ( Pinnacle )
PostPosted: July 20th, 2018, 14:38 
Offline
User avatar

Joined: June 19th, 2018, 4:52
Posts: 45
Location: United Kingdom
Sorry I had one head deactivated:

Technology mode key : ..........................: OK

RAM:
Read HDD Info : ................................: OK
Heads number : .................................: 2
Head map : .....................................: 3
SA Cyl Count : .................................: 170
Serials Mark : .................................: 0xCB16
Control version : ..............................: 46A1

Zone allocation table : ........................: Err

ROM:
Read Rom Infos : ...............................: OK
ROM Data Size : ................................: 192 Kb
ROM version : ..................................: 05.FME
ROM generation : ...............................: 05.FME
Link table version : ...........................: 04.0K
ROM Firmware version : .........................: 000500FM

ROM Modules:
Flash ROM dir reading : ........................: OK
Switched off heads : ...........................: Yes
Heads number : .................................: 0x2
Heads number in use : ..........................: 0x2
heads map : ....................................: 0,1


Top
 Profile  
 
 Post subject: Re: WD 250GB Zone allocation table Error ( Pinnacle )
PostPosted: July 20th, 2018, 15:55 
Offline
User avatar

Joined: June 19th, 2018, 4:52
Posts: 45
Location: United Kingdom
Update. A hot pcb swap seems to work drive is reading and writing acceptable.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group