Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Previous topic | Next topic 
Author Message
unknown
 Post subject: ST1000DM010
PostPosted: July 26th, 2018, 9:46 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Hello
Drive in topic came to me with heads stucked to platters, after releasing the heads the drive is spinning normally with full calibration but stuck in busy.
Terminal output:
Boot 0x20M
SpinUp
RECOV Servo Op=0100 Resp=0005
Trans
Rst 0x20M Thermistor Temp 0021
Retry delay
Retry delay
DOS:0 Scan Unit
LD:
PP:
No HOST FIS-ReadyStatusFlags 0002A181
2Sync:01 0C
ASCII Diag mode

F3 T>

Thanks in advance
Top
 Profile  
 
Masterclass
 Post subject: Re: ST1000DM010
PostPosted: July 27th, 2018, 1:04 
Offline

Joined: May 29th, 2011, 8:47
Posts: 131
Location: Russia
Take it to someone skilled if you need data
Top
 Profile  
 
unknown
 Post subject: Re: ST1000DM010
PostPosted: July 27th, 2018, 8:02 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Agree.
Are you skilled enough to do the job and retrieve the data from that drive?
Top
 Profile  
 
reco
 Post subject: Re: ST1000DM010
PostPosted: July 29th, 2018, 22:08 
Offline

Joined: August 7th, 2015, 5:48
Posts: 44
Location: New York, USA
there is patch function in MRT to solve No host problem, you can have a try.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 161 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group