Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Previous topic | Next topic 
Author Message
zerodegree
 Post subject: SAMSUNG HD161HJ PCB DANOR ROM (BIOS CHIP TRANSFER)
PostPosted: July 27th, 2018, 9:40 
Offline

Joined: September 10th, 2017, 5:09
Posts: 8
Location: turkey
Hello Friends

After a while the Samsung HD161HJ disc starts the engine stops. I'm gonna change the Pcb. Which ROM on the PCB?


Attachments:
scv_1532675405090459025189413071569.jpg
scv_1532675405090459025189413071569.jpg [ 322.25 KiB | Viewed 5015 times ]
Top
 Profile  
 
rogfanther
 Post subject: Re: SAMSUNG HD161HJ PCB DANOR ROM (BIOS CHIP TRANSFER)
PostPosted: July 27th, 2018, 9:47 
Offline

Joined: October 16th, 2013, 13:21
Posts: 713
Location: Brazil
No rom in pcb. Rom is inside main chip.

You need to get same board with the same firmware, or adapt board or firmware to be the same as your hard disk.

That said, the problem may not be in the board. Are you connecting the disk directly to the sata port of a computer, or through USB adapter Have you tried with another power supply for the computer, or at least another sata plug ?
Top
 Profile  
 
zerodegree
 Post subject: Re: SAMSUNG HD161HJ PCB DANOR ROM (BIOS CHIP TRANSFER)
PostPosted: July 27th, 2018, 11:29 
Offline

Joined: September 10th, 2017, 5:09
Posts: 8
Location: turkey
I'm using a DFL 4x data recovery device.

Samsung HD161HJ disc motor stops after running? what is the solution to the problem.
Top
 Profile  
 
pcimage
 Post subject: Re: SAMSUNG HD161HJ PCB DANOR ROM (BIOS CHIP TRANSFER)
PostPosted: July 27th, 2018, 13:08 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
If it spins up OK and then stops, then it’s highly unlikely to be a PCB problem.

Most likely a firmware issue.

Some terminal output would help a proper diagnosis, rather then just assuming it’s the PCB.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
zerodegree
 Post subject: Re: SAMSUNG HD161HJ PCB DANOR ROM (BIOS CHIP TRANSFER)
PostPosted: August 1st, 2018, 3:23 
Offline

Joined: September 10th, 2017, 5:09
Posts: 8
Location: turkey
The problem of stopping when I plug in from the same donor pcb card is solved. I can not reach it. Which chip to change.
Top
 Profile  
 
rogfanther
 Post subject: Re: SAMSUNG HD161HJ PCB DANOR ROM (BIOS CHIP TRANSFER)
PostPosted: August 1st, 2018, 9:18 
Offline

Joined: October 16th, 2013, 13:21
Posts: 713
Location: Brazil
Start by providing the log as suggested by @pcimage and @Spildit.

No "chip" to change in this.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Bing [Bot], Google Adsense [Bot] and 119 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group