All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Need diagnostic help w/ Seagate ST3000DM001
PostPosted: August 15th, 2018, 2:21 
Offline

Joined: October 7th, 2016, 1:01
Posts: 9
Location: United States
I have a Seagate 3TB ST3000DM001 drive that I think the PCB is bad. Was wondering if someone can help me with diagnose the problem.

Right now the drive after being connected to the SATA power, you can hear the drive "click whining". It's not the normal CLICK-CLICK-CLICK, but the click sounds more like a whine. After a while it would just stop. BIOS won't recognize it, but in Windows 10's Disk Management it display the drive but not with any sort of information.

I have attached a picture of the PCB

https://photos.app.goo.gl/CM4mZduWXgZD3vYZA

PCB board number is 100664987 REV B

HDD FW: CC4B


TIA


Top
 Profile  
 
 Post subject: Re: Need diagnostic help w/ Seagate ST3000DM001
PostPosted: August 15th, 2018, 14:55 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7171
Location: UK
Dollar to a cent it’s not the PCB.

If you could show the terminal output it would help immensely with attempting to diagnose the fault.

_________________
PC Image Data Recovery
www.pcimage.co.uk


Top
 Profile  
 
 Post subject: Re: Need diagnostic help w/ Seagate ST3000DM001
PostPosted: August 15th, 2018, 15:47 
Offline

Joined: October 7th, 2016, 1:01
Posts: 9
Location: United States
What sort of terminal output?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group