BIOS WED5000BEVT-22A0RT0

[Oscar78]

have a WD5000BEVT. See Details

WED5000BEVT-22A0RT0
2060-771672-004 REV A
PN: XXXXX-XXX

Faileure: Wont recogniced by BIOS and System
I NEED THE FIRMWARE BIOS

[mhp666]

If you need the ROM, I can send it to you within 4 hours.

[Oscar78]

perfect, thank you very much

If you need the ROM, I can send it to you within 4 hours.

[mhp666]

I pass the firmware

Attachments

Firmware.zip

(5.11 MiB) Downloaded 337 times

[Oscar78]

the data that I have of the hdd are:
MDL: WD5000BEVT-22A0RT0
WWN: 50014EE600B137F5
DATE: 28 NOV 2010
DCM: HVNTJVB
DCX: 5A060B4R6
R / N: 771672
PRODUCT MALASYA

The original bio makes the platters do not turn, if I put another bios of a similar disc, if they turn me on and logically I do not recognize it, but if I turn the platters.
The original bio in another similar disc also makes the platters do not rotate.

The original bio does the same thing on several similar discs

[Oscar78]

yes, I have MRT

Do you have MRT or any other firmware tool ? Can you READ original ROM ? If so please do post it.

Does your PCB have an external ROM chip ? It should have. Can you read it with external programmer ? If you manage to get a dump please post it.

Now with compatible ROM+Loader can you gain access to SA ? If so you might be able to get some modules needed to regenerate the adaptives on ROM that you will be missing by the use of non-native ROM.

Also if the PCB does have external ROM you will NOT have a copy of ROM modules on SA... Or in better words there will be just templates without usefull data to regen ROM and you will need to use other tricks.

[mhp666]

If with the original BIOS the disk is not set when starting a moment in bsy, and with the other of the same model if, it is that the original ROM is wrong (with a high% chance).
When you place the hard disk donor you must have access to the SA and then rebuild the ROM.
Have you tried this?

Greetings.