hdt721010sla360 clicking

[magnetepazzo]

hello guys, I have an old Hdd, it seems that haunt me a hitachi 1tb 2008 october hdt721010sla360 that after the spin makes a click. Connected to MRT is not detected under any circumstances. According to you are the heads?
***

Startup Mode...................................... : Diagnosis Mode


WARNING! Failed to obtain the hard disk ID information. It may caused by the following reasons:
1. Incorrect compiler module.
2. NV-RAM configuration is incorrect.

Selected family:HDx7210SL

Model:

Loading TeachKey.................................. : Error

WARNING! Failed to read Flash ROM. It may caused by the following reasons:
1. PCB board failure.
2. Flash ROM chip damage.

[mhp666]

I would get a working drive of the same model and try ! Does MRT read modules/nvram from a drive of the exact same model ? If so the problem is indeed with the drive and not with MRT

+1

I think that it is a good working method to assume that the tools can give errors for certain HDD models.

[magnetepazzo]

Yes it's a great idea.