View topic - ST1000LM035-1RK172 FW:- SBM3

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST1000LM035-1RK172 FW:- SBM3

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

khaja_345

Post subject: ST1000LM035-1RK172 FW:- SBM3

Posted: November 3rd, 2018, 4:26

Joined: June 9th, 2014, 4:44
Posts: 24
Location: India

hi,

i have problem with this seagate HDD rosewood

Boot 0x80M

Rst 0x80MSrv DETCR init 0x0000
EDAC Value = 0000F018E59FF018
EDAC Value = 0000F018E59FF018
EDAC Value = 0000F018E59FF018
EDAC Value = 0000F018E59FF018
EDAC Value = 0000F018E59FF018
EDAC Value = 0000F018E59FF018
EDAC Value = 0000F018E59FF018
EDAC Value = 0000F018E59FF018
DOS:0 Scan Unit
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC

Overlay PartNum: 08102038
CFW PartNum: 12041940
Overlay CompileDate: 20160810
CFW CompileDate: 20161204

OverlayCompatibilityCheck failed

Overlay PartNum: 08102038
CFW PartNum: 12041940
Overlay CompileDate: 20160810
CFW CompileDate: 20161204

OverlayCompatibilityCheck failed

any one have solution for this please help.

Top

MindMergepk

Post subject: Re: ST1000LM035-1RK172 FW:- SBM3

Posted: November 3rd, 2018, 4:30

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan

can we check via Teamviewer ?

_________________
Data Recovery Pakistan

Top

pepe

Post subject: Re: ST1000LM035-1RK172 FW:- SBM3

Posted: November 7th, 2018, 16:44

Joined: October 3rd, 2005, 0:40
Posts: 4334
Location: Hungary

I guess this drive did not get into this state just by itself, so what's the story?

_________________
Adatmentés - Data recovery

Top

fzabkar

Post subject: Re: ST1000LM035-1RK172 FW:- SBM3

Posted: November 7th, 2018, 16:56

Joined: September 8th, 2009, 18:21
Posts: 15526
Location: Australia

ISTM that the OP is using an incompatible donor ROM after transferring the patient's adaptives to it ??? Or could this be the result of an interrupted firmware update?

_________________
A backup a day keeps DR away.

Top

Masterclass

Post subject: Re: ST1000LM035-1RK172 FW:- SBM3

Posted: November 8th, 2018, 0:13

Joined: May 29th, 2011, 8:47
Posts: 131
Location: Russia

I bet someone wrote foreign modules and diag overlays' version mismatch

Top

khaja_345

Post subject: Re: ST1000LM035-1RK172 FW:- SBM3

Posted: November 11th, 2018, 4:55

Joined: June 9th, 2014, 4:44
Posts: 24
Location: India

fzabkar wrote:

ISTM that the OP is using an incompatible donor ROM after transferring the patient's adaptives to it ??? Or could this be the result of an interrupted firmware update?

Hi

look like others tried it.

Top

MindMergepk

Post subject: Re: ST1000LM035-1RK172 FW:- SBM3

Posted: November 11th, 2018, 5:09

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan

fzabkar wrote:

ISTM that the OP is using an incompatible donor ROM after transferring the patient's adaptives to it ??? Or could this be the result of an interrupted firmware update?

absolutely correct, The ROM has been tempered.

_________________
Data Recovery Pakistan

Top

pepe

Post subject: Re: ST1000LM035-1RK172 FW:- SBM3

Posted: November 11th, 2018, 15:54

Joined: October 3rd, 2005, 0:40
Posts: 4334
Location: Hungary

i knew it was tampered, but the story is still useful when thinking about the solution

_________________
Adatmentés - Data recovery

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum