All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: need smart info help
PostPosted: November 12th, 2018, 13:38 
Offline

Joined: November 12th, 2018, 13:34
Posts: 19
Location: estonia
can somebody take look my hdd smart info and tell me how good condition they are?

HD Tune Pro: ADATA SP550NS38 Health

ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 0 0 ok
(05) Retired Block Count 100 100 0 0 ok
(09) Power On Hours Count 100 100 0 1007 ok
(0C) Power Cycle Count 100 100 0 925 ok
(A0) Unknown Attribute 100 100 0 0 ok
(A1) Unknown Attribute 100 100 0 157 ok
(A3) Unknown Attribute 100 100 0 13 ok
(A4) Unknown Attribute 100 100 0 97360 ok
(A5) Unknown Attribute 100 100 0 112 ok
(A6) Unknown Attribute 100 100 0 13 ok
(A7) Unknown Attribute 100 100 0 72 ok
(A8) Unknown Attribute 100 100 0 1000 ok
(A9) Unknown Attribute 100 100 0 93 ok
(AF) Unknown Attribute 100 100 0 0 ok
(B0) Unknown Attribute 100 100 0 0 ok
(B1) Wear Range Delta 100 100 50 145 ok
(B2) Used Reserved Block Count 100 100 0 0 ok
(B5) Program Fail Count 100 100 0 0 ok
(B6) Erase Fail Count 100 100 0 0 ok
(C0) Unsafe Shutdown Count 100 100 0 107 ok
(C2) Temperature 100 100 0 47 ok
(C3) Hardware ECC Recovered 100 100 0 0 ok
(C4) Reallocated Event Count 100 100 16 0 ok
(C5) Current Pending Sector 100 100 0 0 ok
(C6) Offline Uncorrectable 100 100 0 0 ok
(C7) Interface CRC Error Count 100 100 50 1 attention
(E8) Available Reserved Space 100 100 0 100 ok
(F1) LifeTime Writes 100 100 0 720856 ok
(F2) LifeTime Reads 100 100 0 457742 ok
(F5) Unknown Attribute 100 100 0 389440 ok

Health Status : ok



HD Tune Pro: TOSHIBA DT01ACA200 Health

ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 16 0 ok
(02) Throughput Performance 139 139 54 71 ok
(03) Spin Up Time 129 129 24 21493973287 ok
(04) Start/Stop Count 100 100 0 1359 ok
(05) Reallocated Sector Count 100 100 5 0 ok
(07) Seek Error Rate 100 100 67 0 ok
(08) Seek Time Performance 124 124 20 33 ok
(09) Power On Hours Count 100 100 0 4146 ok
(0A) Spin Retry Count 100 100 60 0 ok
(0C) Power Cycle Count 100 100 0 910 ok
(C0) Unsafe Shutdown Count 99 99 0 1362 ok
(C1) Load Cycle Count 99 99 0 1362 ok
(C2) Temperature 181 181 0 167504838689 ok
(C4) Reallocated Event Count 100 100 0 0 ok
(C5) Current Pending Sector 100 100 0 0 ok
(C6) Offline Uncorrectable 100 100 0 0 ok
(C7) Interface CRC Error Count 200 200 0 0 ok

Health Status : ok



HD Tune Pro: TOSHIBA External USB 3.0 Health

ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 50 0 ok
(02) Throughput Performance 100 100 50 0 ok
(03) Spin Up Time 100 100 1 2626 ok
(04) Start/Stop Count 100 100 0 2709 ok
(05) Reallocated Sector Count 100 100 50 0 ok
(07) Seek Error Rate 100 100 50 0 ok
(08) Seek Time Performance 100 100 50 0 ok
(09) Power On Hours Count 98 98 0 1197 ok
(0A) Spin Retry Count 154 100 30 0 ok
(0C) Power Cycle Count 100 100 0 2040 ok
(BF) G-sense Error Rate 100 100 0 30 ok
(C0) Unsafe Shutdown Count 100 100 0 336 ok
(C1) Load Cycle Count 100 100 0 7112 ok
(C2) Temperature 100 100 0 227634511897 ok
(C4) Reallocated Event Count 100 100 0 0 ok
(C5) Current Pending Sector 100 100 0 0 ok
(C6) Offline Uncorrectable 100 100 0 0 ok
(C7) Interface CRC Error Count 200 200 0 0 ok
(DC) Disk Shift 100 100 0 0 ok
(DE) Loaded Hours 100 100 0 162 ok
(DF) Load/Unload Retry Count 100 100 0 0 ok
(E0) Load Friction 100 100 0 0 ok
(E2) Load-in time 100 100 0 193 ok
(F0) Head Flying Hours 100 100 1 0 ok

Health Status : ok



HD Tune Pro: WD Ext HDD 1021 Health

ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 200 200 51 0 ok
(03) Spin Up Time 196 191 21 6191 ok
(04) Start/Stop Count 96 96 0 4748 ok
(05) Reallocated Sector Count 200 200 140 0 ok
(07) Seek Error Rate 200 200 0 0 ok
(09) Power On Hours Count 96 96 0 3607 ok
(0A) Spin Retry Count 100 100 0 0 ok
(0B) Calibration Retry Count 100 100 0 0 ok
(0C) Power Cycle Count 96 96 0 4095 ok
(C0) Unsafe Shutdown Count 200 200 0 99 ok
(C1) Load Cycle Count 191 191 0 27562 ok
(C2) Temperature 120 95 0 27 ok
(C4) Reallocated Event Count 200 200 0 0 ok
(C5) Current Pending Sector 200 200 0 0 ok
(C6) Offline Uncorrectable 200 200 0 0 ok
(C7) Interface CRC Error Count 200 200 0 0 ok
(C8) Write Error Rate 200 200 0 0 ok

Health Status : ok


Last edited by underdeath21 on November 12th, 2018, 13:42, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: need smart info help
PostPosted: November 12th, 2018, 13:40 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Should be OK.
Also surface scan required.


Top
 Profile  
 
 Post subject: Re: need smart info help
PostPosted: November 12th, 2018, 18:38 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15528
Location: Australia
Most of the ADATA SMART attributes are briefly explained in the following datasheet:

http://www.vikingtechnology.com/wp-content/uploads/M2_42mm_SMI_SM2258.pdf

_________________
A backup a day keeps DR away.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 70 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group