Hi guys, I have this hdd that takes a long time in BSY state. Connected to MRT i see Zone allocation table: error. I tried to load ldr that a friend of the forum gave me, but at first it was not loaded. I then disabled module 02, turned off and on again and so I managed to load LDR after loading ldr the hdd was recognized as 310.89 GB but still remains inaccessible. I made a complete backup of the modules and I noticed that the 0D module of the ROM and 0002 of the SA had a read error. Tips ? Thank you
*** Technology mode key : ..........................: OK
RAM: Read HDD Info : ................................: OK Heads number : .................................: 1 Head map : .....................................: 0 SA Cyl Count : .................................: 256 Serials Mark : .................................: 0xFE16 Control version : ..............................: 7412
Zone allocation table : ........................: Err
ROM: Read Rom Infos : ...............................: OK ROM Data Size : ................................: 256 Kb ROM version : ..................................: 25.12E ROM generation : ...............................: 25.12E Link table version : ...........................: 0B.36 ROM Firmware version : .........................: 00250012
ROM Modules: Flash ROM dir reading : ........................: OK Switched off heads : ...........................: Yes Heads number : .................................: 0x6 Heads number in use : ..........................: 0x5 heads map : ....................................: 0,1,5,6,7
SA Module Dir Loading... Load SA Module dir : ...........................: Error, suggest to load from the file Configuration reading : ........................: Err
Load LDR(0x11), As permanent overlay... Send Data(0x11) : ..............................: Err(Send Data Fail) Load LDR : .....................................: Err
Load LDR(0x5C), As permanent overlay...
Load LDR(0x11), As permanent overlay... Load LDR : .....................................: Err
Close 02 module ... Get 02 access information : ....................: OK Check 02 access data : .........................: OK Close 02 module : ..............................: OK
Load LDR(0x11), As permanent overlay... Send Data(0x11) : ..............................: Err(Send Data Fail) Load LDR : .....................................: OK
load 01... Get 01 module from HDD : .......................: OK Load module list : .............................: OK Zone allocation table : ........................: OK SA SPT : .......................................: 1980
|