All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Seagate Grenada Head Adjustment For repair
PostPosted: March 4th, 2019, 20:46 
Offline

Joined: July 6th, 2013, 15:13
Posts: 310
Location: ISLAMABAD
Hi Every body.

Grenada/ Bacall Moose, pharaoh, moose, and many more families Head adjustment for Repair in the video.

For Data Recovery the method is same, but the commands are different.

http://www.mediafire.com/file/67l4sdkla ... nt.7z/file

after write test finish.
Attachment:
writing test.jpg
writing test.jpg [ 583.79 KiB | Viewed 18610 times ]



Reading test is in process
Attachment:
reading test.jpg
reading test.jpg [ 523.32 KiB | Viewed 18610 times ]




Kind Regards
Waqas Ali
www.sediv.net


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 4th, 2019, 21:06 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !
Great sir . Well done .
Fully automatic and accurate and too much work has been put on on this .
I can see the effort behind this.
Well done once again.


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 4th, 2019, 23:52 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3561
Location: Chicago
waqas_ali766 wrote:
For Data Recovery the method is same, but the commands are different.

Nobody in their right mind is going to run AFH adjustment test on faulty heads on a drive that needs Data Recovery.
Plus it's only going to work on SOME heads that are slow reading but still see servo. Not many drives like that come for DR

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 0:20 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Do Seagate's helium drives still use F3 architecture? If so, then this technique may be the only option in some cases (for some shops).

I wonder if anyone who has been successful with this procedure has reverted to the original adaptives and then retested the bad head. I'm wondering whether a "touchdown" on the platter may clean a dirty head.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 5:08 
Offline

Joined: December 3rd, 2017, 11:23
Posts: 45
Location: Karachi
great work

i am intereted to buy this software.

please give me the price with training

thanks


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 5:47 
Offline

Joined: July 6th, 2013, 15:13
Posts: 310
Location: ISLAMABAD
Hi doomer sir

"Nobody in their right mind is going to run AFH adjustment test on faulty heads on a drive that needs Data Recovery.
Plus it's only going to work on SOME heads that are slow reading but still see servo. Not many drives like that come for DR"

Off course you cannot work on licking drives,
Here is the condition, you can run AFH adjust only on the drives where 1 head is stop reading, or reading extremely slow like 1 MB or less then that.
its not only AFH. in video there is DAC, AFH ,RW. some hidden area cannot b visible in the screen, because size become big.

The video is related to repairing of Drive only.

If you wana see the Real Data recovery case, i can show you the case, with a video. and it works perfect.

Many poeple of forum already done this method on there DR Cases, and get good result.

This only work on drives having 1 or 2 head week, slow speed of reading like less then 1 MB.

If some one thinking it work on clicking drive, he is a fool.


Hi fzabkar
"Do Seagate's helium drives still use F3 architecture? If so, then this technique may be the only option in some cases (for some shops).

I wonder if anyone who has been successful with this procedure has reverted to the original adaptives and then retested the bad head. I'm wondering whether a "touchdown" on the platter may clean a dirty head."

Basically i am doing this on drives below , like Grenada, bacall, muskies, muskie plus, moose, pharaoh, brinks, yarrar_5400, yarrarX, etc families,
which we get in my lab for repair.
i have not saw a seagate helium filed drive in my lab for repair hehe.

Yes many person of the forum get success with this, i have done on remote for them.
but if an un-experience person touch AFH and DAC and RW, offcouse he will damage it. because there is certain limit of adjustment, once you cross that limit, after that Heads become Dead.


i am doing this by CHS mode, and its the real result.

i am set the timeout to minimum with Command. and then do a CHS test, for repair Write/ Read CHS test to compare the performance.

Once it repaired the task will stop, if it was not repair or left any zone no-repaired, then program automatic moved to Zone cutting, and cut the faulty zones of a drive in repairing process.

in the post i have written its a Repairing purpose video.
You can use this trick in Data Recovery but only by Reading CHS and adjust, again read and adjust. in software there is section for manually editing all Adaptives.

1. DAC
2. AFH
3. RW

any once can adjust manually. in all this what section have to adjust, its a question. every drive have different parameters.

There is always a formula to adjust the AFH, DAC, RW.

Kind Regards
Waqas Ali


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 9:44 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3561
Location: Chicago
waqas_ali766 wrote:
Many poeple of forum already done this method on there DR Cases, and get good result.

I'm not saying that it's impossible I'm saying it's dangerous.
A drive could MD during the procedure and kill data

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 10:43 
Offline

Joined: December 3rd, 2017, 11:23
Posts: 45
Location: Karachi
hi

can i ask, who made this SOFTWARE.

is that work directly on hdd, via sata port and terminal

or is that work like pc-3000 and mrt,

integrated with hardware card.

thanks


Attachments:
123.jpg
123.jpg [ 203.63 KiB | Viewed 18464 times ]
Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 13:47 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1626
Location: Italy
waqas_ali766 wrote:
Hi doomer sir

Yes many person of the forum get success with this, i have done on remote for them.
Waqas Ali


i'm one of them :)
Thank you Waqas for helping me to solve my Grenada case :)

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 14:04 
Offline

Joined: July 6th, 2013, 15:13
Posts: 310
Location: ISLAMABAD
Hi RAJOO

Sediv Technologies Pvt Ltd. its a Registered Company in Pakistan. i am the author of this software.

its not the same as Russian Sediv software. its my own Company name.

As you know i am the only first distributor of Sediv, and from beginning, i have this company and website, and my every things is registered with this info.

so i continues my own things with this name also.

I am the author of this software.

if have SATA Power and Data Card, different then MRT and pc3000.


it have Dongle Protection + PC hard ware + Sata Card + power + internet + location.

Normally you will not feel that it have this protections. its done in few seconds only.


Kind Regards
Waqas Ali



"can i ask, who made this SOFTWARE.

is that work directly on hdd, via sata port and terminal

or is that work like pc-3000 and mrt,

integrated with hardware card.

thanks"


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 16:03 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
waqas_ali766 wrote:
"Do Seagate's helium drives still use F3 architecture? If so, then this technique may be the only option in some cases (for some shops).

I wonder if anyone who has been successful with this procedure has reverted to the original adaptives and then retested the bad head. I'm wondering whether a "touchdown" on the platter may clean a dirty head."

Basically i am doing this on drives below , like Grenada, bacall, muskies, muskie plus, moose, pharaoh, brinks, yarrar_5400, yarrarX, etc families,
which we get in my lab for repair.
i have not saw a seagate helium filed drive in my lab for repair hehe.

I understand that the procedure does work. However, I would like to verify that the original problem returns when the original adaptives are restored. I'm wondering whether the read problem may be due to a dirty head, in which case heating the head may cause it to touch down on the platter, thereby cleaning it.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 17:41 
Offline

Joined: July 6th, 2013, 15:13
Posts: 310
Location: ISLAMABAD
fzabkar, Hi

For Example you have Grenada drive with 2 heads. you fully clone its head 0 with a speed of 1230 MB/s , but when you start reading from head 1 the speed is less then 1 MB or show a lot of skip Sectors.

In that conditions you have to Adjust DAC, and don't touch AFH.

For Adjusting the Values , this is a limit , what to increase.

have 4 Sections
1. WrCur
2. WrDamp
3. WrDampDur
4. HtRng


these all 4 value's have there own means. what to increase and how many times. it depends. on the Read and Write value.

For Data Recovery just Increase it to Max value of first section .
1 by 4th value on second section
1 by 3rd value on third section
and max value to last section

this will work for Grenada drive.
Bacall need AFH adjustment, and Bacall have 12 Sections. every section have there own means.


once you have a case contact me on whats app or Skype, i will show you on team viewer

whatsapp = +971-52-8991351
skype = waqasali766@hotmail.com
Telegram = +971-52-8991351

Kind Regards
Waqas Ali


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 19:43 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
I would expect that parameters 1 - 3 would affect writing only. :-?

    1. WrCur
    2. WrDamp
    3. WrDampDur

In any case, all I'm asking is, if you revert to the original settings, does the speed revert to 1MB/s?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 19:45 
Offline

Joined: December 3rd, 2017, 11:23
Posts: 45
Location: Karachi
to the great and talented MR. WAQASALI,

great work

after to see your video about your software

i feel proud to be a PAKISTANI

You are really very talented person

i think you are the only person in the WORLD

who knows this much about SEAGATE

i think your software for seagate is betterthan MRT, PC-3000 and SEDIV,

thanks


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 5th, 2019, 20:02 
Offline

Joined: July 6th, 2013, 15:13
Posts: 310
Location: ISLAMABAD
fzabkar, "I would expect that parameters 1 - 3 would affect writing only. :-?

1. WrCur
2. WrDamp
3. WrDampDur

In any case, all I'm asking is, if you revert to the original settings, does the speed revert to 1MB/s? "


This effect Reading and writing both.

After increase if you fully cloned or half cloned, then after back to original it will become to 1 MB +- again.

Kind Regards


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 7th, 2019, 19:56 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4314
Location: Hungary
yes, these adjustments are pretty nice, i've been doing them for 6-8 years and it really affects success rate, plus reduces demand on parts. My method is somewhat different though...

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 8th, 2019, 2:08 
Offline

Joined: December 3rd, 2017, 11:23
Posts: 45
Location: Karachi
pepe wrote:
yes, these adjustments are pretty nice, i've been doing them for 6-8 years and it really affects success rate, plus reduces demand on parts. My method is somewhat different though...



sir

you mean you have this type of software, since 6-8 years


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 8th, 2019, 2:53 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
@RAJOO, it's not as elegant as a software solution, but you can achieve the same end by hand, using terminal commands.

http://www.hddoracle.com/viewtopic.php?f=175&t=2682

Here is a solution using a ZOC script generated by Excel:
https://www.youtube.com/watch?v=W9KbKw57GxI

I did propose this solution in 2010 ...
https://forum.hddguru.com/viewtopic.php?f=1&t=17491

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 8th, 2019, 11:24 
Offline

Joined: July 6th, 2013, 15:13
Posts: 310
Location: ISLAMABAD
fzabkar,

@RAJOO, it's not as elegant as a software solution, but you can achieve the same end by hand, using terminal commands.

http://www.hddoracle.com/viewtopic.php?f=175&t=2682

Here is a solution using a ZOC script generated by Excel:
https://www.youtube.com/watch?v=W9KbKw57GxI

I did propose this solution in 2010 ...
https://forum.hddguru.com/viewtopic.php?f=1&t=17491




The Steps are ok , but he is increasing by wrong way and wrong section.

and he is doing only AFH.



Kind Regards


Top
 Profile  
 
 Post subject: Re: Seagate Grenada Head Adjustment For repair
PostPosted: March 9th, 2019, 8:25 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4314
Location: Hungary
RAJOO wrote:

sir

you mean you have this type of software, since 6-8 years


completely different solution that does not take ages, thus usable for dr as well.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 61 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group