View topic - Need help in reviving a Maxtor 6L300R0

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Need help in reviving a Maxtor 6L300R0

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

systremor

Post subject: Need help in reviving a Maxtor 6L300R0

Posted: December 28th, 2018, 12:47

Joined: December 28th, 2018, 12:42
Posts: 2
Location: Croatia

I have a Maxtor 6L300R0 (BAJ41G20) with a dead PCB. I've bought another 6L300R0, but this name is the BAH41G10 model. The dead drive has the Beagle E5-D4 main IC chip, while the donor drive has the D4-D4 IC chip. The donor drive also has a Hynix flash chip, while the dead drive has a Winbond chip.

I've replaced the PCB on the dead drive, and it does spin up and seek the heads, but it will not get recognized by the BIOS. In master mode, the computer locks up while detecting the drive, while in slave mode, the computer boots up as if the drive isn't hooked up.

Is there a method to get it running without replacing the heads, platters, or chips on the board?

Top

helpdisc

Post subject: Re: Need help in reviving a Maxtor 6L300R0

Posted: December 28th, 2018, 13:57

Joined: December 12th, 2005, 3:32
Posts: 705
Location: Belgrade

nema lakog nacina

_________________
HddSurgery - Professional Data Recovery Tools

Top

systremor

Post subject: Re: Need help in reviving a Maxtor 6L300R0

Posted: December 28th, 2018, 15:02

Joined: December 28th, 2018, 12:42
Posts: 2
Location: Croatia

helpdisc wrote:

nema lakog nacina

znaci nabaviti istu elektroniku?

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 137 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum