All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: How i can reset S.M.A.R.T attirubites for ST320LM001
PostPosted: January 6th, 2019, 17:10 
Offline

Joined: January 6th, 2019, 11:58
Posts: 1
Location: Türkiye
disk stabile working and not have bad sectors. 0B ATTIRUBUTE triggered only

Code:
ActiveFW : 00
             FWVer : 0001
                         SATA PLL cal done
                                          DDR size detected = 8MB

                                                                  DDR size detec                                                                                                                                                             ted = 8MB

         *PAUNI_L2957*PA VID=0006 PN=0009 Rev=0002- PA_UNI Found
                                                                *PAUNI_L2957*PA                                                                                                                                                              VID=0006 PN=0009 Rev=0002- PA_UNI FoundU
S_0:31
SO_1
SPU@30'C,5010mV
IS=6
CLA ..36/62
HO..OK
HO RPM=1955 OK
AC 557
ST..OK
mS1 00000003
GT:423
SC(L):4123/62
BE.N:18
LD..OK
SK C:  7267 H:0
Loaded FIT ( 0: 0: 1)
CalibTable Loaded. Rev:0x1B
ResoTable Loaded. Rev:0x01
Bump Limit Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Fw Active 00
Ovly loaded to 0x00014D00
Ovly loaded to 0x1002E068
FdtTable Loaded. Rev:0x02
Up MC

PwrOn RRO1x @ H0
Table) cos = -167168, sin = 320000
Coeff) cos = -68108, sin = -108893

DiskSlip : 51 [SrvTrk]
DiskSlip : 45 [SrvTrk]
TgtCyl:     832
Hd:   0 Zn:   0 Avg.:     136
TgtCyl:  266176
Hd:   0 Zn:   1 Avg.:     957

SVCAL(0080,0000)-->PASS
ReadyTime = 2854166 us
ENG>
[H_R:0005DD650:0800 M:0000 E:0000]
[WV000:0005DD650:0800 @1]
[H_W:0005DD650:0800 M:0000 E:0000]
[H_R:0005DC650:0800 M:0000 E:0000]
[WV000:0005DC650:0800 @1]
[H_W:0005DC650:0800 M:0000 E:0000]
[WV000:0005DBEB8:0008 @1]
[WV000:000600840:0010 @1]
[WV000:000000920:0008 @1]
[WV000:0005DBD70:0020 @1]
mS1 00000003
SK C:155618 H:0
[WV000:0005DBEB8:0008 @1]
[WV000:0005DBD70:0020 @1]
mS1 00000003
SK C:155783 H:0
SC(U)..4123/132
UD..OK : 132
PK_4   C:    26 H:0
mS1 00000003
GT:423
SC(L):4121/44
BE.N:19
LD..OK
SK C:  7132 H:0
[WV000:000000920:0008 @1]
[WV000:000600840:0010 @1]
mS1 00000003
UF 3 1stGrayErr Hd:0
SK C:165463 H:1
SC(U)..4121/148
UD..OK : 148
PK_4   C:    10 H:1



Top
 Profile  
 
 Post subject: Re: How i can reset S.M.A.R.T attirubites for ST320LM001
PostPosted: January 6th, 2019, 17:41 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10526
Location: Portugal
0B = 11 = Recalibration Retries

Use something like SHT DEMO to issue the super on + manualy input the ATA VSC to clear S.M.A.R.T.

You can of course use PC-3000, MRT, SeDiv, SHTR, etc to clear S.M.A.R.T. pressing one key ...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 34 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group