Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
February 17th, 2019, 11:12
hello friends ,
I had replaced pcb dead board for 2Tb Seagate and replaced the bios but still dead not spinning only getting deduction so u guys can help me out for this
February 17th, 2019, 13:12
Maybe soldering problem.
If there is no soldering problem Maybe Rom chip died. If Rom died hdd won't spin.
February 17th, 2019, 13:16
if you got same pcb, pls. check pin connection again. if pin soldering and connection ok, then chip off and read via ROM reader and see whether ROM chip ok.
February 17th, 2019, 13:40
Well,
Could Be a Dead And Shorted HSA " Heads Stack Assembly " .
Powered by phpBB © phpBB Group.