View topic - ST1000DM003-1CH162 Problem

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST1000DM003-1CH162 Problem

Page 1 of 1

[ 7 posts ]

Previous topic | Next topic

Author

Message

gps31

Post subject: ST1000DM003-1CH162 Problem

Posted: February 18th, 2019, 2:33

Joined: January 18th, 2010, 23:53
Posts: 335
Location: india

In Terminal just getting

Quote:

Boot 0x40M
Spin Up
FAIL Servo Op=0100 Resp=0007
0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 1BC0 0073 07CA 3540 0008 0000 0000 0000 0FFF 0000 0000 0000 0000 0000 0000 0000 1293 2699 FFFF 2000 20CC 0002 0000 4014 0000 4014 0000 2247 0000 0020 001F 0007 0010
FAIL Servo Op=0100 Resp=0003
0100 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 2040 0077 07CA 3540 0008 0000 0000 0000 0FFF 0000 0000 0000 0000 0000 0000 0000 1293 2699 FFFF 2000 20CC 0002 0000 4014 0000 4014 0000 007F 0004 0020 001F 0004 0000

Just two clicks then spin down.
What is the problem?

when head changed then also get the same result.

Top

pcimage

Post subject: Re: ST1000DM003-1CH162 Problem

Posted: February 18th, 2019, 3:42

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK

What happens when you put heads back in donor?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Dananjaya

Post subject: Re: ST1000DM003-1CH162 Problem

Posted: February 18th, 2019, 6:06

Joined: February 2nd, 2019, 1:21
Posts: 192
Location: Sri Lanka

i think platter problem. sometimes your donor heads will not work now. if donor heads work with donor hard, just change the pcb.

Top

gps31

Post subject: Re: ST1000DM003-1CH162 Problem

Posted: February 18th, 2019, 8:38

Joined: January 18th, 2010, 23:53
Posts: 335
Location: india

Yes , After head swap donor is not working.

is there any chance to recover?

Top

pcimage

Post subject: Re: ST1000DM003-1CH162 Problem

Posted: February 18th, 2019, 11:39

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK

gps31 wrote:

Yes , After head swap donor is not working.

is there any chance to recover?

In which case there are two explanations that spring to mind...

1. Your head swap didn't go well, it got messed up.
2. The drive has media damage on one or more of the platter surfaces.

Probably has a chance of partial recovery, if you know what you're doing.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Dananjaya

Post subject: Re: ST1000DM003-1CH162 Problem

Posted: February 19th, 2019, 11:11

Joined: February 2nd, 2019, 1:21
Posts: 192
Location: Sri Lanka

if you used cleanroom and proper tools for head swapped, most of time platter has degrade problem, sometimes magnet dust on the platter. specially platter 0. so you have well experiance you can clean the platters. after cleaning platters don't use new donor heads for very first time. normally i have small collection of weak heads and use weak donor heads for 1st time and see results.

Top

MindMergepk

Post subject: Re: ST1000DM003-1CH162 Problem

Posted: February 19th, 2019, 14:36

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan

can you upload the ROM of both patient and donor, just to verify that heads are compatible in the first place ?

_________________
Data Recovery Pakistan

Top

Page 1 of 1

[ 7 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 49 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum