Fix Erased SA - ST3000DM001, ST2000DM001 using Factory LDR.

Hi, i trying restore my dropped Drives, this is My personall disks and by mistake I Format SA.
Drives at this moment returning logs:

LED 000000BB FAdr: 00004254
But Loading Factory Ldrs, drives returning Log:

Code:: Boot 0x40M Spin Up ESC - Remaining in BootFW Rst 0x40M SIM Error 1021 LBA 0000000000066E5F FD FC3AB070 RW Error 00000080 MCMainPOR: Start: User Data Base 0043B708 Check MCMT Version: Current MC026: Reconstruction: MCMT Reconstruction Start [RSRS] 0000 Starting LBA of RW Request=0000001210 Length=00000762 ProcessRWError -Read- at LBA 0000001210 Sense Code=4311008 1 InitiateMarkPendingReallocateRequest for disc_lba: 0000001210! ErrorSegment 0000 MultiReadXfrStatus 0000 0001 ErrorSegment 0000 MC001: Reconstruction: EXCEPTION: Segment Read Fai led MC002: Reconstruction: EXCEPTION: Error in Header MC006: Reconstruction: EXCEPTION: Error in fir st Header Disc Sector ReadFooters (Backwards): Segment 0000 SegmentStartLBA 0000001210 FooterLBA 00 0012DC Sequ 00000001.................................. MC007: Reconstruction: EXCEPTION: Error in Header and ALL Footers MC022: Reconstruction: HeadPtr was unwritten MC024: Reconstruction: Completed: [MCMTWS] Tail/Head 0 000 0000 MCMainPOR: MCTStateFlags 00000022 MCStateFlags 00000040 Tms 00000EB1 SP200: MSPMainPOR Start[0000000000000000]v{00000008}qv{00000008}qv{00000008}qv{00000008}qv{00000008 }qv{00000008}qv{00000008}qv{00000008}qv{00000008}qv{00000008}q Starting LBA of RW Request=0000000000 Length=00000120 ProcessRWErr or -Write- at LBA 0000000000 Sense Code=C4090081[000000002BB5420C]v{00000008}qv{00000008}qv{00000008}qv {00000008}qv{00000008}qv{00000008}qv{00000008}qv{00000008}qv{00000008}qv{00000008}q FAILED to spare00004903 Device Fault is set! MSP ERROR: Init ScratchPad Disc MSP MainPOR: 00000000 Tms 00000EB1 000007FF 000016C7 MSP ERROR: ScratchPad disabled No HOST FIS-ReadyStatusFlags 2002A1A1 ASCII Diag mode F3 T>5 OverlayCompatibilityCheck failed Unable to load Diag Cmd Processor Overlay F3 T>V40 OverlayCompatibilityCheck failed Unable to load Diag Cmd Processor Overlay

I have all Backups, for My Drives, Modules sys modules ROMs, and factory LDRs(Prepared to my drives).
I do not have MRT and Virtual Start enviromment but i have access to Terminal Using Factory LDR.
Only Using Sediv54012, LOD Edit 1.04, F3RomExplorer.

Any Suggestions, for this Problem?