Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 31 posts ]  Go to page Previous  1, 2
  Previous topic | Next topic 
Author Message
pcimage
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 25th, 2019, 16:58 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Head(s) have failed due to media damage.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Dananjaya
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 25th, 2019, 16:59 
Offline

Joined: February 2nd, 2019, 1:21
Posts: 192
Location: Sri Lanka
i think your heads are not working due to magnet residue.
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 25th, 2019, 17:20 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
Dananjaya wrote:
i have never used MRT. but i think there will be a option call Service Area bypass ( SA bypass) If you have ROM backup then ok. bec. sa bypass option change the ROM.if bypass Ok and if heads are ok you can see the modules and you can correct them. after correcting you have to write original ROM.

yes. i ask paitent and donor PCB. bec. i am not sure about donor head.

i think 0 _ 10% area of platter has a damage since dropped.



Both originally USB drive. Converted to sata before.
Left donor right patient (blue)
Attachment:
20190326_003159.jpg
20190326_003159.jpg [ 433.52 KiB | Viewed 5602 times ]


Attachment:
20190326_002708.jpg
20190326_002708.jpg [ 397.33 KiB | Viewed 5604 times ]

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
cpm0088
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 25th, 2019, 19:01 
Offline

Banned User

Joined: March 22nd, 2019, 17:02
Posts: 39
Location: London
HddDonorMarket wrote:
I don't understand why all 4 heads gone . I am not sure about heads died.

Tried again with LDR and couldn't load mode 1. I load mode 1 from my backup. . Now shows modules list. But cannot read amy modules from disk. When try to open giving error.

Model WDC ROM MODEL Fblite
Serial wdc rom sw# xyz

Capacity 1 (0 fb)


Did you try head test of all 4 heads using cylinder -2 ? The audio file you uploaded sounded like failed heads and not heads that were seeking.

_________________
[spam removed]
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 26th, 2019, 7:32 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
cpm0088 wrote:
HddDonorMarket wrote:
I don't understand why all 4 heads gone . I am not sure about heads died.

Tried again with LDR and couldn't load mode 1. I load mode 1 from my backup. . Now shows modules list. But cannot read amy modules from disk. When try to open giving error.

Model WDC ROM MODEL Fblite
Serial wdc rom sw# xyz

Capacity 1 (0 fb)


Did you try head test of all 4 heads using cylinder -2 ? The audio file you uploaded sounded like failed heads and not heads that were seeking.

Yes I tried head test. Says all heads died.

I guess heads 0 or/and 1 gone. Or g list , p list , zone table corrupted.
I don't believe all 4 heads gone. But MRT says all gone. Anyway I ll try to swap head later.

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com


Last edited by HddDonorMarket on March 26th, 2019, 7:35, edited 1 time in total.

Top
 Profile  
 
cpm0088
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 26th, 2019, 7:34 
Offline

Banned User

Joined: March 22nd, 2019, 17:02
Posts: 39
Location: London
OK try load LDR and Module list and then try to structure test "By Track"

HddDonorMarket wrote:
cpm0088 wrote:
HddDonorMarket wrote:
I don't understand why all 4 heads gone . I am not sure about heads died.

Tried again with LDR and couldn't load mode 1. I load mode 1 from my backup. . Now shows modules list. But cannot read amy modules from disk. When try to open giving error.

Model WDC ROM MODEL Fblite
Serial wdc rom sw# xyz

Capacity 1 (0 fb)


Did you try head test of all 4 heads using cylinder -2 ? The audio file you uploaded sounded like failed heads and not heads that were seeking.

Yes I tried head test. Says all heads died

_________________
[spam removed]
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 27th, 2019, 8:24 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
Customer lucky
I have cloned % 98 .

I don't know when happened this damage. Before clone whether when cloning.

Attachment:
20190327_153058.jpg
20190327_153058.jpg [ 205.58 KiB | Viewed 5500 times ]

Attachment:
Wed Mar 27 15-26-24.jpg
Wed Mar 27 15-26-24.jpg [ 29.82 KiB | Viewed 5499 times ]

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
cpm0088
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 27th, 2019, 8:33 
Offline

Banned User

Joined: March 22nd, 2019, 17:02
Posts: 39
Location: London
Why did you not open the drive before? Seems like you wasted a lot of time

_________________
[spam removed]
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 27th, 2019, 8:35 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
cpm0088 wrote:
Why did you not open the drive before? Seems like you wasted a lot of time


Learning )).

Watt do you mind about head? If I clean could be work for another case?

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
HddDonorMarket
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 27th, 2019, 8:52 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
HddDonorMarket wrote:
cpm0088 wrote:
Why did you not open the drive before? Seems like you wasted a lot of time


Learning )).

Watt do you mind about head? If I clean could be work for another case?


I can answer my question .lol. if that damage occurred. Heads gone.

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com
Top
 Profile  
 
pcimage
 Post subject: Re: WD10JMVW 11AJGS2 stopped when clone
PostPosted: March 27th, 2019, 15:27 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
HddDonorMarket wrote:
Customer lucky
I have cloned % 98 .

I don't know when happened this damage. Before clone whether when cloning.

Attachment:
20190327_153058.jpg

Attachment:
Wed Mar 27 15-26-24.jpg


This must have happening during cloning, no way would have gotten 98% clone as it stands now. The heads would have been killed instantly by that damage.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 31 posts ]  Go to page Previous  1, 2

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 152 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group