August 12th, 2019, 8:48
August 12th, 2019, 12:45
August 12th, 2019, 13:23
August 12th, 2019, 14:14
posidon wrote:Hi lcoughey
I mean I cloned same disk again using udma . I am using hard disk cloner yec ninja.
August 12th, 2019, 19:08
August 12th, 2019, 21:51
posidon wrote:Today I would like to share my experience with hddsuperclone.
I got a old wd hard disk for cloning which was from automation equipment.
It was in working condition (win xp sp3) but being old & already having bad sectors it could have failed anytime.
I cloned it using dedicated standalone hardware cloner , cloning completed successfully however target disk did not booted.
I cloned same disk again in UDMA with only 1 skipped sector and 1 defective sector. This time disk even didn't showed partitions.
Finally I tried hddsuperclone & it was successful with OS running perfectly.
moral of the story is sometimes a freeware can do wonders & $7000 device may not work.
Hddsuperclone has matured & is getting updated with newer features.
I am planning to buy pro in near future but I am hopeful maximus after reading this nice review will give me one pro license free
August 13th, 2019, 1:29
lcoughey wrote:posidon wrote:Hi lcoughey
I mean I cloned same disk again using udma . I am using hard disk cloner yec ninja.
You mean UDMA means the old UDMA or the newer UDMA-E? Either way, this should be a perfect clone, short the missing sectors. My only guess is that you didn't re-enable the MBR so that the clone drive would be bootable.
I don't know much about the YEC Ninja, but my understanding is that they aren't very good for unstable drives.
August 14th, 2019, 1:59
maximus wrote:I am curious of make and model of the hard drive. Maybe it was so old it was CHS only and did not have LBA capability? XP was after that era, but maybe the old drive was upgraded? Yes, I do like to think that HDDSuperClone is awesome! But sometimes I like to know why (so I can prove it)
August 14th, 2019, 17:12
disk details sent you in pm.
August 16th, 2019, 2:56
August 16th, 2019, 7:42
DR-Kiev wrote:Regarding UDMA-E , you just forgot to return 55BB to 55AA. That is why you didnt see paritions.
August 16th, 2019, 12:03
posidon wrote:DR-Kiev wrote:Regarding UDMA-E , you just forgot to return 55BB to 55AA. That is why you didnt see paritions.
Thanks a lot Dr-Kiev
I will note it ,My future cloning using UDMA-E will be success .
August 16th, 2019, 14:03
Amarbir[CDR-Labs] wrote:posidon wrote:DR-Kiev wrote:Regarding UDMA-E , you just forgot to return 55BB to 55AA. That is why you didnt see paritions.
Thanks a lot Dr-Kiev
I will note it ,My future cloning using UDMA-E will be success .
Lol ,
Thats what i was also saying , but credits are only to him
August 18th, 2019, 9:49
Powered by phpBB © phpBB Group.