Need Rom
August 28th, 2019, 11:12
WD1602ABKS-18N8A0
- Attachments
-
-
Re: Need Rom
August 28th, 2019, 11:30
What version are you looking for ?
Re: Need Rom
August 28th, 2019, 12:11
digisupport wrote:What version are you looking for ?
patient pcb is dead replace donor board can't get fw version .
Re: Need Rom
August 28th, 2019, 12:19
Abdul Rauf wrote:digisupport wrote:What version are you looking for ?
patient pcb is dead replace donor board can't get fw version .
Did you try to read ROM via the serial port?
Why not use any ROM and recreate ROM from SA?
Re: Need Rom
August 28th, 2019, 12:33
Did you try to read ROM via the serial port?
- Attachments
-
Re: Need Rom
August 29th, 2019, 7:08
Abdul Rauf wrote:Did you try to read ROM via the serial port?
Select random family. 》go in WD marvel. 》stop action. 》power of on
Pres the button seems bios chip that above test menu》 boot rom mode 》 continue this screen and mostly possible to read rom here
If not work (mostly working) desolder bios and read by external chip reader. Etc etc
But in Picture that you added , look like PCB failure. Look bottom. Drive not ready or busy. Cause
1) PCB or TVS failure or 0 ohm resistor problem.
2) wrong or corrupted ROM
Powered by phpBB © phpBB Group.