View topic - Seagate 0MB Translator violation solution not working

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Seagate 0MB Translator violation solution not working

Page 1 of 1

[ 7 posts ]

Previous topic | Next topic

Author

Message

posidon

Post subject: Seagate 0MB Translator violation solution not working

Posted: August 30th, 2019, 4:31

Joined: January 12th, 2016, 3:46
Posts: 141
Location: India

I am working on a old seagate ST3160813AS /CC2J hard disk.
It gets detected in UDMA-E shows correct model /serial /FW but size is 0mb.
I have applied 0mb Translation violation solution but is not working.
How to go ahead now any suggestions pls.

Attachments:

160gbtrans.JPG [ 200.02 KiB | Viewed 5460 times ]

tr.JPG [ 112.02 KiB | Viewed 5461 times ]

trans.JPG [ 134.61 KiB | Viewed 5461 times ]

160gb.JPG [ 166.75 KiB | Viewed 5461 times ]

Top

MindMergepk

Post subject: Re: Seagate 0MB Translator violation solution not working

Posted: August 30th, 2019, 4:40

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan

it seems SA has problem, what about sysfile 28 ? can you read it without errors ?

_________________
Data Recovery Pakistan

Top

posidon

Post subject: Re: Seagate 0MB Translator violation solution not working

Posted: August 30th, 2019, 4:49

Joined: January 12th, 2016, 3:46
Posts: 141
Location: India

MindMergepk wrote:

it seems SA has problem, what about sysfile 28 ? can you read it without errors ?

Hi MindMergepk
Yes I could read this file with both Heads ,however I am getting errors while reading files 30 ,31 ,32 onwards

Attachments:

28.JPG [ 244.56 KiB | Viewed 5450 times ]

Top

E123

Post subject: Re: Seagate 0MB Translator violation solution not working

Posted: August 30th, 2019, 6:26

Joined: September 26th, 2016, 4:26
Posts: 110
Location: Russia

Judging by the screenshots, you regen the translator. Power off/on. Size shows? Smart cleaned?

Top

posidon

Post subject: Re: Seagate 0MB Translator violation solution not working

Posted: August 30th, 2019, 11:40

Joined: January 12th, 2016, 3:46
Posts: 141
Location: India

E123 wrote:

Judging by the screenshots, you regen the translator. Power off/on. Size shows? Smart cleaned?

Hi E123,
Yes I tried to clear smart but its not working , disk gives LED error. Also tried to regen translator , process gets completed but after power on/ off capacity is still not regained.

Attachments:

transl.JPG [ 133.99 KiB | Viewed 5378 times ]

smart fail.JPG [ 103.93 KiB | Viewed 5378 times ]

Top

E123

Post subject: Re: Seagate 0MB Translator violation solution not working

Posted: August 30th, 2019, 12:09

Joined: September 26th, 2016, 4:26
Posts: 110
Location: Russia

I have CC2J. In the place where you have an error there is a transition "to nowhere." Perhaps a bug. Although I do not exclude that I disassembled something incorrectly. In any case, I can advise changing the firmware to some not so rare one.
RAM:00239CE0 CMP R1, #2
RAM:00239CE2 BNE loc_239CEE
RAM:00239CE4 MOVS R3, R5
RAM:00239CE6 MOVS R2, #0x10
RAM:00239CE8 MOVS R1, #0x51
RAM:00239CEA BL 0x4C889C <----- here
RAM:00239CEE
RAM:00239CEE loc_239CEE ; CODE XREF: RAM:00239CBC↑j
RAM:00239CEE ; RAM:00239CC2↑j ...
RAM:00239CEE MOVS R0, #0
RAM:00239CF0 POP {R3-R7,PC}

Top

posidon

Post subject: Re: Seagate 0MB Translator violation solution not working

Posted: August 31st, 2019, 7:27

Joined: January 12th, 2016, 3:46
Posts: 141
Location: India

Wo great E123 ,Thank You so much,
I will give it a try but I am doubtfull whether I will be able yo do it.

Top

Page 1 of 1

[ 7 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 129 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum