hi guys
I have UDMA (red card) which is not updated (v6.4 I think) So I am unable to work on drives from latest families which are not supported .
I dont have immediate plans for update.
Meantime other alternate is to buy MRT . My portfolio of work is not of very advanced level (basic firmware & DE). I dont have SED /virtual boot etc.
Typically I need WD rom creation , Seagate F3 translator recovery ,Seagate / Toshiba older cases more.
I would like to know whether MRT newer version is as reliable as pc3000 udma ?
If someone could give there opinions about MRT , that will help me to take buying decision.
Thank you

I believe this thread answers your question:
https://forum.hddguru.com/viewtopic.php?f=28&t=38730
(read the last posts)

Short answer: there is nothing like PC3K.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

A straight answer: buy the update for PC3000 and that's it.

You can buy what you think it will be cheaper than the upgrade of PC3000, but I'm sure you will regret it later.

You have the best tool in the market, so why change?
You can add the SSD utility to it (an Utility that really works) and get an even more powerful tool.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

+1

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt

Thanks northwind and others.
I have got answer & saved my valuable money too.