All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Lacie 5big Network v1
PostPosted: March 25th, 2020, 17:31 
Offline

Joined: March 25th, 2020, 17:23
Posts: 1
Location: Indiana
Hello all, new here. I recently got a Lacie 5big Network v1 without drives. I picked up 5 WD Red 2tb drives to put in it. I have researched Lacie's documentation on this NAS and have not been able to get it going. It is not being recognized on the network for the first thing.
I have tried to reset with the directions from lacie.

Switch the machine OFF.
Press and hold the button on the front, and switch the machine ON. The light on the front should begin blinking red. Continue holding the button down until the light stops blinking.
When it stops blinking, release the button. The light will change to the blue color, and begin blinking. Do nothing until the light stops blinking, and is a steady blue color.
Immediately press and hold the button. The light will slowly blink blue to indicate the process was completed successfully. Release the button at this time.
The system will now boot with its default factory settings.

After releasing the button on the slow blinking blue light it keeps blinking for a while then goes to a Red blinking light.

Is there something I am missing???

Help Please.
Thank You


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group