What is the technique to write a ROM to a Hawk2 family drive. I am sure I am missing something simple:-

If I write the ROM to a new board the drive stays BSY
If I write the ROM and then write ROM mods - still stays BSY

I have tried this with several Hawk2 drives with the same result.
Do checksums need to be recalculated?

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

I recall something but i have to dig to find notes about it (if i made any).

pepe

_________________
Adatmentés - Data recovery

Thanks for the reply.
Ace Labs have asked me to role back to 6.0 to see if that makes a difference.
Might be an update issue.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

I can confirm that it is PC3000 which is the issue.
Rolling back to 6.0 worked.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group

Talking about PC3k, i have issues with building head map in DE for samsung drives, first F2EG, now F4_3D, i had to write prog to build map for them, coz the one Pc3k built was kind of shifted (i did not really trace it down, if the shift was consistent, or what, just wrote a prog to build good one).
dunno if anybody noticed such behaviour...

pepe

_________________
Adatmentés - Data recovery