Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 
  Previous topic | Next topic 
Author Message
dmarques
 Post subject: Firmware for Fujitsu MHV2080BH
PostPosted: February 13th, 2008, 12:50 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Hi,

Does anyone has modules for a Fujitsu MHV2080BH.

Thanks.
Top
 Profile  
 
dobrevjetser
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: February 14th, 2008, 5:37 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
PCI or UDMA ?

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
dmarques
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: February 14th, 2008, 6:43 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
UDMA is better.
Top
 Profile  
 
dobrevjetser
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: February 14th, 2008, 9:58 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
here are some modules.

Dobre


Attachments:
File comment: modules 2
FUJITSU MHV2080BH 0081002D NW70T61255LK.rar [155.92 KiB]
Downloaded 1839 times
File comment: modules
FUJITSU MHV2080BH 892C NW13T662AFWU.rar [159.06 KiB]
Downloaded 1544 times

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
dforionstar
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: June 3rd, 2008, 14:48 
Offline

Joined: June 3rd, 2008, 14:34
Posts: 1
I have FUJITSU MHV2080BH, NW13T6528WH7, Firmware: 892C.

Should I update?

What will the update do to my HD?

How do I do this? I could not find and firmware info on Fujitsu website.

Thank you!
Top
 Profile  
 
pepe
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: June 5th, 2008, 12:37 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
Hi Dforionstar,

If u don't have problems with the drive, U probably don't need to mess with FW. If something turns out wrong, u loose the drive and the data, so it is better not to touch it.

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
sieger007
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: July 18th, 2008, 1:39 
Offline

Joined: July 18th, 2008, 1:29
Posts: 4
My Fujitsu MHV2080BH 80gb SATA HDD on an Nc6320 HP Laptop , after 5 mins of run gives me repeated BSOD's.
I am thinking this is a problem with firmware not a physical HDD failure. Does anyone have a similar exp and some sucess.?
I download the firmware from the above thread but I dont know any TOOL or UTILTY that will help me install that very firmware. I stumbled upon and IBM install utility on this website that preloads its own firmware , but not this firmware.
Does anyone know how to install a firmware .pcr file you already have
Thanks
Sam
Top
 Profile  
 
dobrevjetser
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: July 18th, 2008, 3:09 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
Sieger,

You need the PC3K utility for that. This is a combination of hard-and software, and very expensive.
Without that these files are useless.

Best regards,

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
sieger007
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: July 18th, 2008, 14:22 
Offline

Joined: July 18th, 2008, 1:29
Posts: 4
Hi Friends
Thanks for your help. The BSOD's showed varying ' curses' . The most common was a kernel_in_page_error or some like that. Most common goggled cause was HDD failure. I agree with what the gentleman just said - about investing in trying to get back your data from a HDD on respirators and sending it to death. Fortunately I got back my data and the HDD is right now co-operative enough to give more than a few spins as long as I dont make it run - but soon as I copy or move even 50mb of data there is the BSOD.
I think I got it all wired wrong - that firmware could be the reason. Apparently 'firmwaring' the drive is a different ball game. So I just threw it off - and got a new one.
Thanks for all your help folks have a great week-end
Bye
Sam
Top
 Profile  
 
minhbdkt
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: September 22nd, 2010, 23:21 
Offline

Joined: August 18th, 2010, 7:43
Posts: 1
Location: Viet Nam
Thanks but What is password file .raz?
Top
 Profile  
 
ik2
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: November 9th, 2010, 14:45 
Offline

Joined: November 9th, 2010, 14:41
Posts: 1
Location: estonia
Thanks but What is password file FUJITSU MHV2080BH 0081002D NW70T61255LK.rar
Top
 Profile  
 
AntonB
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: April 25th, 2020, 15:12 
Offline

Joined: April 25th, 2020, 15:09
Posts: 4
Location: Austria
I have a FUJITSU MHV2080BH with a size of 80 GB.

Is my current firmware version 892C the latest firmware?
Top
 Profile  
 
BGman
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: April 27th, 2020, 2:37 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
AntonB wrote:
I have a FUJITSU MHV2080BH with a size of 80 GB.

Is my current firmware version 892C the latest firmware?


This is the only one! Enjoy it!
:D :D :D
Top
 Profile  
 
AntonB
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: April 27th, 2020, 4:22 
Offline

Joined: April 25th, 2020, 15:09
Posts: 4
Location: Austria
BGman wrote:
This is the only one! Enjoy it!
:D :D :D


Ok, what a pity.

Thank you
Top
 Profile  
 
fzabkar
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: April 27th, 2020, 17:00 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15538
Location: Australia
AntonB wrote:
BGman wrote:
This is the only one! Enjoy it!
:D :D :D


Ok, what a pity.

Thank you

Firmware updates are generally only issued in response to problems. What problem are you having?

_________________
A backup a day keeps DR away.
Top
 Profile  
 
AntonB
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: April 28th, 2020, 0:08 
Offline

Joined: April 25th, 2020, 15:09
Posts: 4
Location: Austria
Maybe that the HDD doesn't work well with Windows 10?
Top
 Profile  
 
BGman
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: April 29th, 2020, 8:23 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
AntonB wrote:
Maybe that the HDD doesn't work well with Windows 10?

The HDD is more than 12 years old!!!!
What do you expect?
:shock: :shock: :shock:

Just buy another one.
Top
 Profile  
 
AntonB
 Post subject: Re: Firmware for Fujitsu MHV2080BH
PostPosted: April 29th, 2020, 9:19 
Offline

Joined: April 25th, 2020, 15:09
Posts: 4
Location: Austria
Don't have money
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 18 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 158 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group