Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
crystalrajasthan
 Post subject: Diagnostic Port Locked showing in ST1000DM003
PostPosted: July 10th, 2017, 7:44 
Offline

Joined: October 8th, 2012, 5:29
Posts: 44
Location: India
I have Seagate ST1000DM003 Sata hdd
when we power on the hdd message showing....

Boot 0x40M
SpinUp
Trans
Rst 0x40M Thermistor Temp 0029
2Sync:01 0E
2Sync:01 0E
2Sync:01 0E
2Sync:01 0E
2Sync:01 0E
(P) SATA Reset

LD: Size:00000028 HBlocks:0000 Size:002BC5C7 HBlocks:0031 Size:00281445 HBlocks:0031 FlashRestore 00000000 00000028 A879
PP: Size:0000B400 HBlocks:0000 FlashRestore
PVTSize: 00015A24 CompSize: 00001824 DeCompSize: 00015A24 00000000 00001824 AD2B
2Sync:00 04
DSP011E
ASCII Diag mode


and working on terminal showing ....

Diagnostic Port Locked

how can we access the Data in these kind of drives

any help is appreciated....
Top
 Profile  
 
data-medics
 Post subject: Re: Diagnostic Port Locked showing in ST1000DM003
PostPosted: July 10th, 2017, 13:27 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
Latest version of PC-3000 software can unlock them.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company
Top
 Profile  
 
magnetepazzo
 Post subject: Re: Diagnostic Port Locked showing in ST1000DM003
PostPosted: September 19th, 2020, 6:00 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
I have same issue, I have unlocked the port but I cant read sysfile. Suggestion ?

LD: Size:00000028 HBlocks:0000 Size:002BFDDF HBlocks:0032 Size:00283137 HBlocks:0032 FlashRestore 00000000 00000028 8CE7
PP: Size:0000B400 HBlocks:0000 FlashRestore
Top
 Profile  
 
pepe
 Post subject: Re: Diagnostic Port Locked showing in ST1000DM003
PostPosted: September 19th, 2020, 6:38 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4332
Location: Hungary
what's the error you get?

_________________
Adatmentés - Data recovery
Top
 Profile  
 
magnetepazzo
 Post subject: Re: Diagnostic Port Locked showing in ST1000DM003
PostPosted: September 21st, 2020, 3:45 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
pepe wrote:
what's the error you get?


Rst 0x40M Thermistor Temp 0020RW subfile error 2046
EDAC Value = 0000F018E59FF79E
EDAC Value = 0000F018E59FF79E
Retry delay
EDAC Value = 0000F018E59FF79E
EDAC Value = 0000F018E59FF79E
DOS:0 Scan Unit
LD:
PP:
Send Status: COMRESET seen
2Sync:01 0C

After Virtual start i have tried to clear smart and I see this :
LED:0x000000BD FAddr:0x00008004

Rst 0x40M Thermistor Temp 0020
LED:0x000000BD FAddr:0x00008004

LED:0x000000BD FAddr:0x00008004
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 95 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group