New HDD or old HDD with SMART reset?

Hi all!

Simple question :-)

Buy new HDD, but I'm not sure is it quite new or just old one with SMART reset...

Code:: smartctl -a /dev/sda -d sat smartctl 6.5 (build date Mar 16 2020) [armv5tel-linux-2.6.32.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Ultrastar 7K3000 Device Model: Hitachi HUA723030ALA641 Serial Number: XXXXXXX LU WWN Device Id: XXXXXXX Firmware Version: MKAOA840 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Sat Mar 6 22:32:55 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 23) The self-test routine was aborted by the host. Total time to complete Offline data collection: (28793) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 480) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0 2 Throughput_Performance 0x0005 134 134 054 Pre-fail Offline - 88 3 Spin_Up_Time 0x0007 188 188 024 Pre-fail Always - 393 (Average 429) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 38 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 123 123 020 Pre-fail Offline - 31 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 404 10 Spin_Retry_Count 0x0013 055 055 060 Pre-fail Always FAILING_NOW 262149 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 18 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 37 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 37 194 Temperature_Celsius 0x0002 136 136 000 Old_age Always - 44 (Min/Max 25/48) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 70% 400 - # 2 Short offline Completed without error 00% 397 - # 3 Short offline Completed without error 00% 396 - # 4 Short offline Completed without error 00% 352 - # 5 Short captive Completed without error 00% 55439 - # 6 Short captive Completed without error 00% 55438 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

All seems fine, but this part is interesting:

Code:: SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 70% 400 - # 2 Short offline Completed without error 00% 397 - # 3 Short offline Completed without error 00% 396 - # 4 Short offline Completed without error 00% 352 - # 5 Short captive Completed without error 00% 55439 - # 6 Short captive Completed without error 00% 55438 -

So, this HDD has 400 or 55439 power-on hours?

Thanks in advance!
Antony

antony wrote:All seems fine

does it?

antony wrote:SMART overall-health self-assessment test result: FAILED!
10 Spin_Retry_Count 0x0013 055 055 060 Pre-fail Always FAILING_NOW 262149

my 2013 HGST Ultrastar 7K4000 Hitachi HUS724030ALE641 :

Code:: SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5586 - # 2 Short offline Completed without error 00% 41650 - # 3 Vendor (0xb0) Completed without error 00% 41252 - # 4 Vendor (0x71) Completed without error 00% 41251 -

all "new, old stock" 7K3000/7K4000 have 30-40K hours and a SMART wipe

New HDD or old HDD with SMART reset?

New HDD or old HDD with SMART reset?

Re: New HDD or old HDD with SMART reset?