Hello Fabio,
To handle firmware of Seagate hard disks family you need :
PC3000 ISA version - Seagate U series - U4 / U8 / U10 / U6 / UXX
PC3000 PCI version - Seagate U series X / U Series 7 / U5 / Barracuda ATA I /Barracuda ATA II / Barracuda ATA III / Barracuda ATA IV / Barracuda ATA V / Barracuda 5400.1 / Barracuda ATA 7200.7. / Seagate 2.5 Momentus / Seagate 2.5 Momentus 42 / Seagate Momentus 4200.2 / Seagate Momentus 5400.2 /.
HRT 2.0
SEAGATE U4, U6, U8, V8, U10, UX.
I would like to tell you that I do not say or even wnat that you buy this products, this is only to informe you.
There another way to work with Seagate hard disks, using the Terminal conection but for do this you will need to build the interface - the conection between the hard disk and the Serial port. And you will need the list of the commands to work with Seagate.
People that knew about Terminal are the russians, and a few that speaks english.
My advice is ask here for help with this kind of conection.
I hope that you understand what I wrote.
Bone chance !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|