HGU wrote:
I need firmware for Maxtor DM8+ : 6E030L0510605 : NAR61590
Letters : K,M,B,A
Could someone help ?
My email is :
hg@oreka.comHGU
Hi HGU,
I have uploaded a loader file on zirochka, but there are some
other loaders which might suit you. You can try them in SM.
Look at the loader in hex editor and look at offset 201FEh
You will see 9E63 which confirms that the loader is suitable
for ROM checksum 639E.
Once you get access to SA look at offset 1FFFEh of module 04B80100
(ROM copy of your drive).
or look at report some programs will print out checksum for u.
Now if you want to be accurate you need to find a loader for your
drive type with matching ROM checksum so that you can start
repairing f/w.
Also try to get a proggie mxhelp. This can be used to get info
from loaders and modules and give you some useful information.
From my experience I have a few favourite loaders I use for N40P
and in 80% of cases at least 1 of 3 approach nearly all N40P until
I can get ROM checksum of the drive I need to repair then I use a
ROM checksum matching loader which does the trick.
Hope this helps, but please note this is 4 N40P in SM.