View topic - Need ROM - Seagate U8 Fw: 3.13 ST38410A

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Need ROM - Seagate U8 Fw: 3.13 ST38410A

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

-BR-

Post subject: Need ROM - Seagate U8 Fw: 3.13 ST38410A

Posted: April 3rd, 2005, 3:00

Hi board users.

I am looking for Seagate U8 ROM, with firmware version 3.13. The model is ST38410A (8.4gb). This firmware can be read by PC3000.

If anyone have it and can be kind enough to send me by mail ... :wink:

Thanks

-BR-
rregner@terra.com.br

Top

99none

Post subject:

Posted: April 6th, 2005, 16:18

Joined: September 30th, 2005, 13:58
Posts: 31

hi man,

- tell me : which u need "family code " for this drive

Top

BGman

Post subject: Use a soldering iron

Posted: April 15th, 2005, 4:56

Joined: September 30th, 2005, 7:33
Posts: 849

Just unsolder the BIOS chip from the old PCB and solder it to the new one. It's easy! I have done it many times. It's always hard to find the right FW for Seagate disks... Good luck!

Top

99none

Post subject:

Posted: April 15th, 2005, 5:46

Joined: September 30th, 2005, 13:58
Posts: 31

hi,

- find the right FW for Seagate disks...
- it's easy, connect Terminal Seagate to seagate disk, next Hyper terminal from XP and put this command from keyboard

1. ctrl R
2. ctrl C
3. for s/n %

it's all
- unlock passwd , this is hard working, example for Uxx model ST310014ACE.

Top

pepe

Post subject:

Posted: April 18th, 2005, 6:24

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary

99none wrote:

hi,

1. ctrl R
2. ctrl C
3. for s/n %

Hi, I tried the above sequence, but it didn't make any sensible things
1 and 2 are clear, but could you pls put some light on the 3. step?

thanx
pepe

Top

99none

Post subject:

Posted: April 18th, 2005, 7:01

Joined: September 30th, 2005, 13:58
Posts: 31

hi,

- in terminal Seagate
Ctrl R, cert or reset ATa interface
Ctrl C , clear interface ??, give Fw:

T> %
- give y serial number

Code:

((VALID Cert Disk Code Detected - Revision # 339 

T>Interface task reset
1024k x 16 buffer detected 
U5 - 1_Disk    3.39  01-19-01 13:49

                          Power Cycling
ATReset
PMaster
(

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 158 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum