View topic - mAXTOR 6Y080P0

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

mAXTOR 6Y080P0

Page 1 of 1

[ 9 posts ]

Previous topic | Next topic

Author

Message

vlaszlo

Post subject: mAXTOR 6Y080P0

Posted: December 3rd, 2006, 13:40

Joined: September 24th, 2006, 3:25
Posts: 38

6Y080P0422811-YAR41BW0-NMBA-M8FYA

Accidentaly i killed this drive :oops:

CALYPSO =0MB
but i have the modules
can somebody help me out with correct loader ?

thank you.
VL

Top

hddguy

Post subject:

Posted: December 5th, 2006, 14:52

Joined: November 9th, 2006, 15:15
Posts: 2983

Repair of the drive depends on what you did to kill the drive! Can you tell me more?

Top

sempre

Post subject:

Posted: December 5th, 2006, 14:59

Joined: October 14th, 2005, 9:26
Posts: 1029

What you made to kill hdd?
:lol:

_________________
Нет ничего невозможного

Top

vlaszlo

Post subject:

Posted: December 6th, 2006, 16:20

Joined: September 24th, 2006, 3:25
Posts: 38

First i saved all the modules, and modul groups.
Then written some .bad modules. After power cycle or hdd swap identified itself as 6Y084L2 YAR41BZ of YCR41?? dont remember exactly. Now it is only CALIPSO 0MB, and refuses to load modules after LDR. I found only 6Y080P0422611-YAR41BW0-NMBA-M6FYA instead of 8, i dont know is this important difference. I did not tried yet the safe mode, becouse was busy...

this is from saved modules

Quote:

Name :Value
Family :Calypso
Name

iamondMax Plus 9
Model :6Y080P0422811C
Model 1 :6Y080P2
Code FW :YAR41BW0
Serial :Y2GY49VE
Ata :ATA/133 HDD
Size :80GB
LBA :160086528
Date (Time) :17.4.2004 (18:11)
Alphabetic value :NMBA
PCBA Pn. IDE Label :M8FYA
PCBA Config :28A
Unique :11A
HDA Module :42A
PGT

GT CAL3.28 F4
Cod :995
None :K118
+5V :670
+12V :960
Ver. Module :Q8.39
File Name :05E40100.RPM
Code FW :YAR41BWZ
Check sum ROM :247A
Status

rogram A - Main
File Name :0E840100.RPM
Code FW :YAR41BWZ
Check sum ROM :431B
Status

rogram A - Main
Specification :version 7.0
hda_sn :Y2GY49VE
media_ven :M
motor_ven :B
pcba_config :Y28A
head_ven :N
hda_module :FY42A
preamp_ven :K
hsa_cfg :W
hsa_sn :2YNBKW3CDMBNU
dealloc_hds :0
hda_stat :NB
motor_label :MKGCWBBXX4154R
cnv_mtr_ven :B
media_label

57094MV0PZ3P4
cnv_med_ven :M
act_stat :NB
cnv_hd_ven :N
stw_stat :0
pcba_stat :NB
pcba_pn :M8FYA
pcba_sn :MACGQDZE
vcm_label :XB4BP413
hsa_exp :0
awa_cnt :0
stw_sw_rev :LC102.MA
strk_count :0
tpi_mult :0
test_status :0

[/quote]

Top

Samo

Post subject:

Posted: December 6th, 2006, 17:27

Joined: September 27th, 2005, 4:26
Posts: 505
Location: Bulgaria, Sofia

Hi vlaszlo,
Why you ask for something you already have?

Quote:

Code FW :YAR41BWZ
Check sum ROM :247A
Status

rogram A - Main

_________________
DataRecovery.bg

Top

rameez

Post subject:

Posted: December 8th, 2006, 10:24

Joined: June 27th, 2006, 11:33
Posts: 2287
Location: In ur HDD !

if u load the hdd with bad LDR without safe mode u can damage the hdd SA try loading the hdd with LDR in safe mode then try writing the modules .

Top

vlaszlo

Post subject:

Posted: December 9th, 2006, 12:18

Joined: September 24th, 2006, 3:25
Posts: 38

Samo wrote:

Hi vlaszlo,
Why you ask for something you already have?

Quote:

Code FW :YAR41BWZ
Check sum ROM :247A
Status

rogram A - Main

Becouse some modules are damaged, and i am lost. Want to compare it to good modules. The HDD is working again with original modules ( after playing in safe mode ) but cant tranfer G-list into P-list.

With M6FYA modules P-list is working, but seems that only 1 head is reading correctly. So, i did pretty drastic things with SA but i'm a beginner :oops:

thank you for your help
VL

Top

Samo

Post subject:

Posted: December 11th, 2006, 16:34

Joined: September 27th, 2005, 4:26
Posts: 505
Location: Bulgaria, Sofia

What about Translator regeneration? (Not in Safe, and with born modules)

_________________
DataRecovery.bg

Top

weaker

Post subject:

Posted: December 11th, 2006, 18:19

Joined: December 10th, 2006, 18:24
Posts: 72

I suggest that you read my thread here
http://forum.hddguru.com/maxline-iii-pr ... t6517.html
as I had my drive show up as SABRE 0GB as well and it was due to an incorrect firmware flash.

Top

Page 1 of 1

[ 9 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 92 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum