All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 3rd, 2007, 10:32 
Offline
User avatar

Joined: April 16th, 2005, 11:34
Posts: 92
Hi,

I have a Toshiba MK6032GSX SATA 2.5" drive that it's FUSE and CPU
are burnt out(Its visible on the chip).
I am aware of the fact that Toshiba drives keeps some critical information
like adaptive data inside the ROM. So swapping PCB or perhaps changing
the burnt CPU won't help to access the data
(I suppose that ROM is inside the burnt CPU chip).

Do you think there is a solution to recover data from this drive.
I appriciate any comment in this regard.

Thank you


Attachments:
IMG_1206-CPU.JPG
IMG_1206-CPU.JPG [ 63.51 KiB | Viewed 9164 times ]
Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 3rd, 2007, 10:51 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
Check if you have external ROM on your PCB. It's an 8-pin chip.
If you have it you can swap it to another PCB and it should work.


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 3rd, 2007, 11:14 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Starling wrote:
Check if you have external ROM on your PCB. It's an 8-pin chip.
If you have it you can swap it to another PCB and it should work.


I thought the ROM info was in the "ARM" chip on the PCB?

That's what I've been led to believe on these.

I would like to be corrected if I'm wrong!!! ;-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 3rd, 2007, 11:17 
Offline
User avatar

Joined: April 16th, 2005, 11:34
Posts: 92
Hi Starling,

Thank you for the reply. I think there is no external ROM on the PCB.
Please have a look at the PCB image and correct me if I am wrong.

Again, thanks for the advise.


Attachments:
IMG_1202-PCB.jpg
IMG_1202-PCB.jpg [ 77.33 KiB | Viewed 9181 times ]
Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 3rd, 2007, 14:23 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
PCImage:
on some models (some GAS and GAX models) there is an external flash memory storing the FW, so it could have been true for this one.

Pninja:
Too bad it is not true in your case. U may try swapping the PCB and see if it is possible to read some sectors from the drive (probably not). If yes, then U will have to deal with the shifting points caused by the different translator...
It worked for me once but that was an old model (MAP).
regards,
pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 3rd, 2007, 14:28 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
Then what could be done in these type of cases. is Raw recovery is time saving solution after cloning.

Very interesting post. Must be solved.


Df :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 4th, 2007, 6:51 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Yep, I'm also interested in solving this type of case.

Thankfully Tosh PCB's don't fail very often, but when they do they are a pain in the ass!

:-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 4th, 2007, 9:40 
Offline
User avatar

Joined: April 16th, 2005, 11:34
Posts: 92
pepe:
I swapped the PCB in the first place. It started endless clicking :( .

Pcimage, Darkforce1:
As you have mentioned, these type of problems
are really painful. You have your data intact on the platters but
you are not able to do a damn thing :cry:


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 4th, 2007, 9:51 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
AFAIK, the only way forward is so transfer the "ARM" chip containing the ROM info, onto a compatible PCB.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 4th, 2007, 11:02 
Offline
User avatar

Joined: April 16th, 2005, 11:34
Posts: 92
pcimage wrote:
AFAIK, the only way forward is so transfer the "ARM" chip containing the ROM info, onto a compatible PCB.



AFAIK,
As I said, the ARM chip(Processor) is fired.There is nothing left there to transfer.


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 4th, 2007, 11:05 
Offline
User avatar

Joined: April 16th, 2005, 11:34
Posts: 92
pninja wrote:
pcimage wrote:
AFAIK, the only way forward is so transfer the "ARM" chip containing the ROM info, onto a compatible PCB.




As I said, the ARM chip(Processor) is fired.There is nothing left there to transfer.


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 4th, 2007, 11:13 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
Hello to all

See what I think that after changing head and PCB drive will detect now the problem will be of data. what I think that data will be recovered but only if you try RAW recovery. may be some files with proper name and data will come out but I think you have data but in raw format.

Waiting for PEPE sir's reply.

DF :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 4th, 2007, 14:18 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4335
Location: Hungary
Hi,

I could not figure out this thing up till now, but I am sure there is a solution.

pepe

_________________
Adatmentés - Data recovery


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 5th, 2007, 6:24 
Offline
User avatar

Joined: October 2nd, 2005, 0:30
Posts: 288
Location: Jakarta - Indonesia
darkforce1 wrote:
Hello to all

See what I think that after changing head and PCB drive will detect now the problem will be of data. what I think that data will be recovered but only if you try RAW recovery. may be some files with proper name and data will come out but I think you have data but in raw format.

Waiting for PEPE sir's reply.

DF :)


darkforce1 sir,

Do you mean that the donor PCB is used altogether with its donor head(s) ? So it's more alike transplanting the platters to the donor drive, but in this case only using PCB and heads ? CMIIW

_________________
My Forum


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 5th, 2007, 7:32 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
Hi cryoborgofthevenus

why to transplant platter to doner. No I mean changing PCB only of head is not damage.

DF :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 9th, 2007, 13:51 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3471
Location: CDRLabs @ Chandigarh [ India ]
Hi,
Can we transfer the platter to the donor and recover data in this type of drive if we match everything what has to be matched .this should give atleast some data reading success and with DE it should be better results.

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 9th, 2007, 16:20 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
In this hard disk all the impotent modules like Plist and Glist are in CPU as it is burned so thay are lost. So Changing head or PCB or swapping Platter will not help to get proper data.

DF :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 9th, 2007, 18:13 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
darkforce1 wrote:
In this hard disk all the impotent modules like Plist and Glist are in CPU as it is burned so thay are lost. So Changing head or PCB or swapping Platter will not help to get proper data.

DF :)


Glist cannot be in ROM, it's a Growing list ;-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 9th, 2007, 19:10 
Offline
User avatar

Joined: June 27th, 2005, 8:27
Posts: 615
Location: India
Thank you for correcting me.
DF :)

_________________
DF :)
www.datatracksystem.net


Top
 Profile  
 
 Post subject: Re: Toshiba MK6032GSX SATA with burnt CPU
PostPosted: August 10th, 2007, 5:33 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Welcome friend ;-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 137 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group