All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 951 posts ]  Go to page Previous  1 ... 44, 45, 46, 47, 48  Next
Author Message
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: January 22nd, 2016, 17:13 
Offline

Joined: January 22nd, 2016, 16:30
Posts: 1
Location: Russian
Hi guys, I have a problem( My HDD MDL:WD3200BEKT-60PVMT0 ATA Password locked. I don't know Master and User....Please tell me how to unlock it. I tried (WDR-Demo and clear password, no unlock), ZU.exe not unlock. If you can give a link to a tutorial on reading password in MHDD. When I tried script in MHDD I get an error DRQ
Sorry for my English =(


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: January 29th, 2016, 18:23 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 7864
Location: Portugal
Denis1988 wrote:
Hi guys, I have a problem( My HDD MDL:WD3200BEKT-60PVMT0 ATA Password locked. I don't know Master and User....Please tell me how to unlock it. I tried (WDR-Demo and clear password, no unlock), ZU.exe not unlock. If you can give a link to a tutorial on reading password in MHDD. When I tried script in MHDD I get an error DRQ
Sorry for my English =(


Locked SA access when password is present.

Use WDMarvel instead.

Image

Method 2 - Universal.

If not you will need to block SA access and edit module 02 and write it back whithout the drive loading to RAM the locked firmware.

HOT swap with unlocked compatible drive will do as well.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: January 29th, 2016, 18:29 
Offline

Joined: October 24th, 2005, 17:04
Posts: 218
will not help any program if there is no drq,ie not correctly selected channel


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: March 26th, 2016, 8:38 
Offline

Joined: March 26th, 2016, 8:29
Posts: 1
Location: France
Hi, I new to this forum I learned a lot on how to read 22.bin ...

I have a panasonic CF-53 any HDD or SSD I put inside get a password.
I have two SSD with password yet, so I put a old WD hdd inside, bios also put password on it.
I really need to know the password, I will be able to unlock 2 SSD

So I managed to read 22.bin from my WD2500BEVS


Thanks for the help,
Best regards.


Attachments:
22.zip [444 Bytes]
Downloaded 77 times
22.JPG
22.JPG [ 131.33 KiB | Viewed 3312 times ]
Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: March 26th, 2016, 16:23 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 7864
Location: Portugal
@hayk57

I've replyed to you on my forum. Please check :

http://www.hddoracle.com/viewtopic.php?f=3&t=1541

Regards.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: May 12th, 2016, 23:33 
Offline

Joined: May 12th, 2016, 23:23
Posts: 5
Location: United
hi guys, thank you for this thread.

I reset my HDD using RedoBackup system, I didn't know it will ask for a password!!

my HDD is ATA WDC wd1600bevt-75zct2

i found it here:
https://forum.hddguru.com/viewtopic.php ... &start=120

but i tried entering
241e32..etc
and the other password as well and couldn't open it
is there a way to enter the passwords?
i am extremely new to these things so please help me what should i do?


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: May 12th, 2016, 23:36 
Offline

Joined: May 12th, 2016, 23:23
Posts: 5
Location: United
Spildit, please help i don't care about the data i just want to use my HDD.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: May 13th, 2016, 15:25 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 7864
Location: Portugal
nchanged wrote:
Spildit, please help i don't care about the data i just want to use my HDD.


Either you figure out what is the password that RedoBackup sets by contacting them, for example (i assume RedoBackup did something like secure erase on the target drive) or you get some tools/scripts to read the password set ON YOUR OWN disk (instead of using passwords from drives of other people).

You can use free tools like HDDSuperTool - http://www.hddoracle.com/viewtopic.php?f=22&t=1327 - to read module 02 and figure out the password, or you can use MHDD script as explained on this thread or you can pay $15 for 30 days use of WDMarvel and unlock the drive with one click :

Image

Regards and good luck.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: May 13th, 2016, 20:56 
Offline

Joined: May 12th, 2016, 23:23
Posts: 5
Location: United
Spildit, thanks for your time.
I have put a bios password and I know it & I can enter the bios and change settings, but the password doesn't work with the HDD.
I read here that the redo backup factory reset does not put a password to any HDD

actually the interface when i boot is from Dell Company exactly like this pic (but different serial)
http://www.online-unlock.com/UserFiles/ ... d_595B.gif

https://sourceforge.net/p/redobackup/di ... /dcebd388/
i'm going to use your suggested tools as well as other tools suggested in the link above and see what will happen.
I really appreciate your help.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: May 13th, 2016, 22:40 
Offline

Joined: May 12th, 2016, 23:23
Posts: 5
Location: United
Spildit wrote:
nchanged wrote:
Spildit, please help i don't care about the data i just want to use my HDD.


Either you figure out what is the password that RedoBackup sets by contacting them, for example (i assume RedoBackup did something like secure erase on the target drive) or you get some tools/scripts to read the password set ON YOUR OWN disk (instead of using passwords from drives of other people).

You can use free tools like HDDSuperTool - http://www.hddoracle.com/viewtopic.php?f=22&t=1327 - to read module 02 and figure out the password, or you can use MHDD script as explained on this thread or you can pay $15 for 30 days use of WDMarvel and unlock the drive with one click :

Image

Regards and good luck.

two people had the same issue with redobackup

https://sourceforge.net/p/redobackup/di ... /28ce1c25/
https://sourceforge.net/p/redobackup/di ... /dcebd388/

two aggreed with your suggestion by using MHDD
could you please provide me with MHDD downlod link? i tried this one

http://hddguru.com/download/software/mh ... 4.6iso.zip

there is only REDME.txt file in the ISO and nothing else.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: May 13th, 2016, 23:49 
Offline

Joined: May 12th, 2016, 23:23
Posts: 5
Location: United
thank you so muck for helping me.
i am really happy my drive worked again.

i tried the MHDD softwre (i found it in heren boot cd),

two people used the reset in redobackup and had the same issue, but one of them could review the source code of (reset in redo bckup) and found the password to be RESET, but this password could only be used in MHDD

and i did as they tried.

https://sourceforge.net/p/redobackup/di ... /28ce1c25/
https://sourceforge.net/p/redobackup/di ... /dcebd388/

thank you very much for helping me, thanks to the open source philosophy, without it we would be slaves to the big companies where encryption is used for bad technical purposes.

and thanks to all whom support any open source project.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: May 14th, 2016, 4:46 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 7864
Location: Portugal
You could had used the MHDD script as explained here on the start of this thread and you would get the password from the WD HDD drive firmware (mod 02).
At any rate congratulations for your unlocked drive !!!

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 9th, 2016, 18:37 
Offline

Joined: June 9th, 2016, 18:32
Posts: 1
Location: Bangladesh
please tell me my password here is my 22.bin


Attachments:
Capture.JPG
Capture.JPG [ 160.23 KiB | Viewed 2929 times ]
Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: October 18th, 2016, 19:06 
Offline

Joined: October 18th, 2016, 19:02
Posts: 5
Location: Serbia
Is there anyone who can find the password for my hdd?
bin files are also attached


Attachments:
bin.zip [84.05 KiB]
Downloaded 49 times
wd500.png
wd500.png [ 85.84 KiB | Viewed 2444 times ]
Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: October 18th, 2016, 19:49 
Offline

Joined: January 29th, 2012, 1:43
Posts: 287
Location: United States
Spildit wrote:
You can use free tools like HDDSuperTool - http://www.hddoracle.com/viewtopic.php?f=22&t=1327 - to read module 02 and figure out the password

Has anyone ever even tried this with HDDSuperTool, with either the dump mod 02 script, or the dump mod 42 script for the older drives? And if they have, has anyone paid any attention to the screen output from those commands? :twisted: :twisted: :twisted:
Feed you like babies I have, and yet no one notices :roll:


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: October 19th, 2016, 2:34 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 9616
Location: Australia
http://www.sdcomputingservice.com/hddsupertool/scripts/wd_royl_dump_mod02?attredirects=0&d=1

Code:
# show the user and master passwords
seti $offset = 18 * 4
seti $offset = $offset + 0x32
seti $record_offset = scratchpad $offset w
seti $record_offset = $record_offset + 4
echo ""
echo "User password:"
printscratchpad $record_offset 32
seti $record_offset = $record_offset + 32
echo "Master password:"
printscratchpad $record_offset 32

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: October 20th, 2016, 13:48 
Offline

Joined: October 18th, 2016, 19:02
Posts: 5
Location: Serbia
Hey people,

Just to inform you that I have successfully unlocked a 2.5" WD HDD with zu.exe

WD3200BUCT-63TWBY0

Motherboard: Intel Board i946 (with C2D E6600 and 2x Samsung 1gb DDR2 667Mhz)
SATA Mode: Legacy
Boot from USB

The other drive I was trying to unlock (wd 500gb) and asked for help in my previous post is unusable - first sector (literally first) is bad, MBR is damaged and irreparable. Actually, it is unlocked and functional, but it is impossible to create a partition

Thanks


Attachments:
zu.jpg
zu.jpg [ 237.59 KiB | Viewed 2396 times ]
Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: October 20th, 2016, 17:01 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 9616
Location: Australia
technomaster89 wrote:
The other drive I was trying to unlock (wd 500gb) and asked for help in my previous post is unusable - first sector (literally first) is bad, MBR is damaged and irreparable. Actually, it is unlocked and functional, but it is impossible to create a partition

If the drive were working properly, you should be able to write to the bad sector and the drive should then reallocate LBA 0 to a spare sector. Are you able to read other sectors? You could use a disc editor such as DMDE.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: October 22nd, 2016, 17:22 
Offline

Joined: October 18th, 2016, 19:02
Posts: 5
Location: Serbia
I didn't try too much. I even have problems with disk initialization - first GPT and then convert to MBR. After that, I am able to make a partition, but it's impossible to format it.

Thanks for the DMDE, but I doubt I will try anything else

My next task is to unlock a Seagate 250gb (st3250310as)
Wish me luck


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: March 24th, 2017, 12:54 
Offline

Joined: March 24th, 2017, 12:46
Posts: 2
Location: Texas
I know that this is an older thread but I have a WD Sporpio Blue hard drive Model: WD1600BEVT-75ZCT2 that is password protected. I have no idea what the user or Master passwords are. I've tried several things that I have read and do have the 22.bin file. I just don't know how to properly read it and I have tried several hex viewers. Any help is appreciated. I've attached my 22.bin file but changed the ext to .txt to be able to upload it.


Attachments:
22.txt [512 Bytes]
Downloaded 50 times
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 951 posts ]  Go to page Previous  1 ... 44, 45, 46, 47, 48  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 26 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group