All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 984 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10, 11 ... 50  Next
Author Message
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 14th, 2010, 22:39 
Offline

Joined: June 14th, 2010, 22:30
Posts: 6
Location: In your browser
allen_lii wrote:
Shiniji wrote:
Can someone Help me to find out my Password from the locked HDD:

Log from MHDD V.4.5 (22.bin)

Image

I think its # , but it's always the wrong Password.

HDD: Western Digital WD3200BEVT

Thanks


ChrisY3 wrote:
Having spent far too many hours trying to work out where the password is hiding in my WD1600BEVT-75ZCT2 , could someone please look at my 22.bin and tell me what it is ? I have tried all groups of numbers (but obviously not in the right combination) but cannot suss it. How do i know exactly which are the right ones ?


I think that your user password is the part marked by red box and your master password is the part marked by green box.Try to unlock.


hi, have u solved the password, try "chris" (without quotes)


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 15th, 2010, 0:59 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2332
Location: In ur HDD !
Convert it use a scientific calculator .


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 15th, 2010, 13:32 
Offline

Joined: May 21st, 2010, 13:09
Posts: 3
Location: German
Thanks Guys for help. Thats was the right PW ^^


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 15th, 2010, 23:53 
Offline

Joined: June 14th, 2010, 22:30
Posts: 6
Location: In your browser
ChrisY3 wrote:
Having spent far too many hours trying to work out where the password is hiding in my WD1600BEVT-75ZCT2 , could someone please look at my 22.bin and tell me what it is ? I have tried all groups of numbers (but obviously not in the right combination) but cannot suss it. How do i know exactly which are the right ones ?


try "james" (without quotes)


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 17th, 2010, 1:33 
Offline

Joined: June 10th, 2010, 21:10
Posts: 4
Location: China
Shiniji wrote:
allen_lii wrote:
Shiniji wrote:
Can someone Help me to find out my Password from the locked HDD:

Log from MHDD V.4.5 (22.bin)

Image

I think its # , but it's always the wrong Password.

HDD: Western Digital WD3200BEVT

Thanks


I think that your user password is the part marked by red box and your master password is the part marked by green box.Try to unlock.


Ok, and now what is the Master PW in Decimal? I don' understand this Hex Code. Thx


The master password could be encrypted. Because 00 is not valid in mhdd. Try following input decimal string. "002 003 004 005 006 007 008 068 083 084 080 067"


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 24th, 2010, 9:01 
Offline

Joined: June 24th, 2010, 8:49
Posts: 1
Location: Philippines
I tried MAVR_R and it really works..

Try to download this file: http://nazyura.hardw.net/Mavr_r.zip

then, make a copy to your Bootable USB Flash Drive and run it to your laptop..

for example:

C:\mavr_r.com 00 <enter>

then it will generate some ***logs***.mod, after that transfer your flash drive to your computer and open the file "02_0002.MOD" to your hex workshop and find your password.

ie:
..S|B|L|PAMSHMCZR7VMKRUJ. 07-14-2008..........................11111...........................h2oinsyde........................@....0....d.. 2


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: June 27th, 2010, 23:20 
Offline

Joined: June 27th, 2010, 23:10
Posts: 3
Location: Central America
Hey everyone. I have read this thread and found it wonderful, I honestly always assumed once a HDD was locked with a password that was the end of options. I am in Central America and no profressional data services here.

I have a Toshiba laptop with h20insyde bios. It automatically locked itself (firmware problem) and I bypassed the BIOS. Now the password on the HDD is being asked for.

HDD is WD1600BEVS (WD Scorpio)

I managed to actually remove it, boot to windows live, insert it and install windows to it. Now when I reboot, it asks for the password on the HDD still.

I tried to use ZU however it says device not ready. It's a SATA HD as primary. I tried the /P and /S swithes.

My next attempt was MHDD. I run MHDD off a bootable USB key. I type SHIFT + F3 and find my hard drive (number 6) and press enter. It tells me it has a password.

I try to run the .md script (from page 2) and it gets to line8 and says "Hard drive reports error".

I believe it may be my cs.bin file. To make the CS.bin I copied the code from page 2 and pasted it in a HEX editor. I saved the file as cs.bin.

I know this sounds very noobish but is that wrong? I see meatballx had the same error but never posted how he fixed it, so I am left wondering. Any help would be appreciated.

P.S. I don't care about the data on the HD, I just don't want to buy a new 2.5" SATA HD they are expensive here.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 10th, 2010, 17:23 
Offline

Joined: May 29th, 2010, 12:54
Posts: 2
Location: czech
Please help finding password for hdd WD1600BEVT-22ZCT0. I attach a photo file 22.bin.
Have your dream do not know why I am asking for help. I unlocked one hdd ihned.S that you really have no advice. Thank you for your reply.

Sorry for the translation, I translated by Google


Image


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 11th, 2010, 22:42 
Offline

Joined: May 29th, 2010, 12:54
Posts: 2
Location: czech
Hello
So I thread again properly read. In 22.bin file I found these numbers:
Image

All combinations converted to decimal, but no combination Hdd not unlock. Please help with your password.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 17th, 2010, 8:19 
Offline

Joined: July 17th, 2010, 5:16
Posts: 1
Location: Poland
Hi. I have entcountnered stragne problem during unlocking wd2500bevs and Your wisdom Friends. While I obtained 22.bin file I realized that master password is WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW and the user password in in hex: 02 00 0b 00 05 00 0b 00 07 00 09 00 08. When I try to type converted into dec password using numpad the 007 gives me "beep" from the speaker and nothing shows, and when I type 008 the last charracter is deleted. How I have to type 000, 007 and 008? Do You have any solution for this problem? I attatched my bin. Please help me becasuse the master password doesnt work - in MHDD it always says FAIL?


Attachments:
dump.txt [512 Bytes]
Downloaded 1048 times
Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 17th, 2010, 23:40 
Offline

Joined: July 17th, 2010, 21:48
Posts: 5
Location: Pensacola, Fl. USA
I have a WD3200BEVT i've been trying to unlock. I have been read this thread over and over and over again and just can't figure this hex out. I finally managed to pull the info from the firmware with mhdd, but am not quite sure on what bytes it's located at. It kinda looks like it's all 0's but I know that can't be right. Also reading over most have had to enter the pass in mhdd using the ALT-GR key, but what if you don't have that key! 2 ALT's but no ALT-GR. I've done a little hex editing cells and such, but this is different to me. If somebody could point me in the right direction I would really appreciate it. I'll be danged if I'm gonna let this drive get the best of me :D I've also tried HDDerase to see if I could wipe the drive completely but the drive doesn't show up in the program. I don't know if it's because of the sata port or not, but my IDE drive shows up so it must be. Thanks for the help guys.


Image


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 19th, 2010, 12:51 
Offline

Joined: May 16th, 2009, 9:32
Posts: 329
Location: UNited Kingdom
Alt-Gr is the right hand Alt key
and you need to use the numeric pad (in num kock mode) to enter the numbers

You passwords look strange
hex 00 26 00 18 00 2f 00 12 then padded out with 00's
and
00 ad 00 0d

but then they dont have to be ascii characters and could be weird hex


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 19th, 2010, 14:15 
Offline

Joined: July 17th, 2010, 21:48
Posts: 5
Location: Pensacola, Fl. USA
Tell me about it. I pulled it and looked at it and said WHAT THE HELL!! Thanks though. Now I know about the GR key I'll convert those to dec. and try to input them.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 23rd, 2010, 12:59 
Offline

Joined: June 14th, 2010, 22:30
Posts: 6
Location: In your browser
pensacol wrote:
Tell me about it. I pulled it and looked at it and said WHAT THE HELL!! Thanks though. Now I know about the GR key I'll convert those to dec. and try to input them.


easy man.. :)
after i see ur bin file, i guess ur password is "love" (without quotes).
Give it a try n let us know


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 23rd, 2010, 15:56 
Offline

Joined: July 17th, 2010, 21:48
Posts: 5
Location: Pensacola, Fl. USA
Santo_Kho wrote:
pensacol wrote:
Tell me about it. I pulled it and looked at it and said WHAT THE HELL!! Thanks though. Now I know about the GR key I'll convert those to dec. and try to input them.


easy man.. :)
after i see ur bin file, i guess ur password is "love" (without quotes).
Give it a try n let us know



Dude are you serious!! That was it!! Now might I ask how in the heck you figured that out? Shoot me a pm and let me know how you did that if you don't mind. Or post it on here, but I'm not sure if they want the public knowing.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 23rd, 2010, 17:07 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2816
Location: England
this is the best thread for thiefs LMAO

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 23rd, 2010, 22:17 
Offline

Joined: July 17th, 2010, 21:48
Posts: 5
Location: Pensacola, Fl. USA
guru wrote:
this is the best thread for thiefs LMAO



It sure is, except for the fact that some us that own computer repair shops, want to try and add some data recovery options to our services, it is also helpfull to get help from colleagues that are more experienced in a particular area than I am. That was the whole purpose behind me telling him to PM me instead of posting it publicly. So before you start judging and assuming that everybody that is trying to unlock a harddrive is just trying to steal somebody's mp3's, maybe you can realize that not everybody is a thief. Some people just want to learn something new. To everybody else, thank you for your help, and a great thread. Keep up the good work.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 24th, 2010, 8:20 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2816
Location: England
of course some shops use this info for legitamate work, bit obvious really.

Please don't judge and assume that I was claiming that everybody on this thread is a thief

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 24th, 2010, 12:21 
Offline

Joined: June 14th, 2010, 22:30
Posts: 6
Location: In your browser
pensacol wrote:
Santo_Kho wrote:
pensacol wrote:
Tell me about it. I pulled it and looked at it and said WHAT THE HELL!! Thanks though. Now I know about the GR key I'll convert those to dec. and try to input them.


easy man.. :)
after i see ur bin file, i guess ur password is "love" (without quotes).
Give it a try n let us know



Dude are you serious!! That was it!! Now might I ask how in the heck you figured that out? Shoot me a pm and let me know how you did that if you don't mind. Or post it on here, but I'm not sure if they want the public knowing.


i think i've write wrongly, im not only see ur bin files,
but i execute it under special program that my friend pass me.
ps: he told me not to share it ;)


Top
 Profile  
 
 Post subject: Re: Unlocking ATA Password for Western Digital
PostPosted: July 24th, 2010, 16:05 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2816
Location: England
please share ! apparently thats why we are here

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 984 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10, 11 ... 50  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 60 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group