All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 14th, 2018, 19:59 
Offline

Joined: May 26th, 2017, 12:52
Posts: 14
Location: Canada
Hi, I have a chip that I can't seem to ID in FE.

The chip comes from a Kingston 32GB USB stick (DT101 G3).

Controller:
PHISON
PS2251-07-V
U01613C
SSNHG2CF

Chip:
FD32B08UCH1-49
S1640- 3058161.06

Looks similar to this one, but 32GB (and one chip) instead of 64GB (http://flash-extractor.com/forum/viewtopic.php?t=9598)

On PC3K, I can see the ID, but I do not have this chip in the database, and I am unable to read the chip.

Does anyone have a datasheet for this chip?

Alternatively, does anyone know why it would ID with PC3K and not with FE?


Top
 Profile  
 
 Post subject: Re: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 14th, 2018, 21:13 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3094
Location: Adelaide, Australia
what is the ID of the chip from PC3K? ad 3a 18 03?
I see this ID in NR.
is this one of the chips that VCCQ requires 1.8v ? there has been some chips that will not ID with FE until you give VCCQ 1.8v and not 3.3v

do you have new power adapterhttp://flash-extractor.com/forum/viewtopic.php?t=9847?

http://www.flash-extractor.com/forum/viewtopic.php?t=9573


Top
 Profile  
 
 Post subject: Re: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 14th, 2018, 21:23 
Offline

Joined: May 26th, 2017, 12:52
Posts: 14
Location: Canada
HaQue wrote:
what is the ID of the chip from PC3K? ad 3a 18 03?
I see this ID in NR.


Yes you are correct. The ID in PC3K is 0xAD3A1803

Unfortunately, I do not have VNR.


Top
 Profile  
 
 Post subject: Re: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 14th, 2018, 21:30 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3094
Location: Adelaide, Australia
Giroot wrote:
HaQue wrote:
what is the ID of the chip from PC3K? ad 3a 18 03?
I see this ID in NR.


Yes you are correct. The ID in PC3K is 0xAD3A1803

Unfortunately, I do not have VNR.


I was talking about the new adapter for SC's NR. Of course VNR would be good as it gives you alot better control, and much more research ability anyway.


Top
 Profile  
 
 Post subject: Re: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 16th, 2018, 4:51 
Offline

Joined: August 31st, 2017, 4:34
Posts: 11
Location: Belgium
Giroot wrote:
The chip comes from a Kingston 32GB USB stick (DT101 G3).

Controller:
PHISON
PS2251-07-V
U01613C
SSNHG2CF

Chip:
FD32B08UCH1-49
S1640- 3058161.06


I've just check the PC3K database and here it is:
Image

Maybe you need to update the software?


Top
 Profile  
 
 Post subject: Re: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 16th, 2018, 13:38 
Offline

Joined: May 26th, 2017, 12:52
Posts: 14
Location: Canada
HaQue wrote:
I was talking about the new adapter for SC's NR. Of course VNR would be good as it gives you alot better control, and much more research ability anyway.


Ah, sorry for the misunderstanding. I currently do not have the new power adapter for SC's NR, but it looks like I will be buying it soon.


Top
 Profile  
 
 Post subject: Re: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 24th, 2018, 21:22 
Offline

Joined: May 26th, 2017, 12:52
Posts: 14
Location: Canada
Update:

I have the SC Power adapter, and I have it set to 1.8v.

However, it still does not ID this chip.

Could it be that the chip itself has failed?


Top
 Profile  
 
 Post subject: Re: Softcenter/FE Reader cannot ID FD32B08UCH1-49 Chip
PostPosted: May 25th, 2018, 1:42 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7071
Location: UK
Try 2.4V

You'll need an external PSU for this, to supply voltage into the adaptor via the external voltages pins.

_________________
PC Image Data Recovery
www.pcimage.co.uk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group