Sandisk SD..

Is is a Sandisk Controller? If so which one?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Sandisk SD card if the NAND is embedded then i think there is no way to recover the data, how ever there are a few pins on the chip which i do not have any info.

First of all, that I am not selling any products BVG.

(you have only one way - take suggestions from their technical support.)
If you want to get ACE all things, what is your role?

(Some facts about BVG tool:
- Speed of reading NAND chips - 1Gb per 11 min! It's VERY slowly!
- You must buy HRT. Why ?????)
This is a very slow, but you can read other reader, and then use the combination to FRT. To pay attention to methods. FRT purchased at the same time to buy HRT can also grant access. HRT After all, there are very powerful in this latest Time to upgrade.

(- VERY poor manuals)
Knowledge in your brain, not in the manual.

(My conclusion - BVG is very retarded tool)
There are two sides to look at something, everyone's different perspective on things will be different views.

ACE's pc3000flash tools I have, in use.
BVG is the procurement of FRT, is looking forward to!
soft-center of the tool is also prepared to buy in.
The latter two of which are automatic tool-based? This user must have more understanding of FLASH.

I do not like automatic-type tool, because I do not want to change my brain to stay.
The tool is the use of human beings, not software. This is my personal view!

Heeelp .... but not with a HDD issue....:

At one point of above post I stopped reading - could not follow what is meant...
Perhaps because I am no native english speaker.
Can they follow ... ?

I answer according what I understood (or think I understood):

Tool manufacturers want to extend their business like any other company.
Their market share remains the same if they keep their tools only accessable
and usable for the "gurus" without need of a manual.

Therefore they start to offer tools with automated procedures which can
also be used from "interested" persons (but far away of being "gurus").
And this "new" market (for tool manufacturers) is much, much bigger,
than the usual "old" one.

Yes, I agree with falther and polanwu. Automatic modes are not always the best ones, though it can be convenient sometimes. I like the combination of automatic and manual modes.

_________________
This user was found to be affiliated with Ace Lab/PC-3000. See this topic for details.

I never believed that rely on a tool to be able to resume all of the same data!
NAND FLASH recovery, it is necessary to combine three tools can be perfect.
1.SOFT-CENTER tools
2.BVG-FRT
3.ACE-FLASH
The most important thing is coupled with your experience.

The first tool, you know how to NAND FLASH on the basic principle of understanding.
The second tool, you can use the knowledge gained in front, combined with their own experience, fabricating their own fall.
The third tool has been the experience of the first two tools after the end of a performance.

Some simply said, is to restore the data, a tool is only a means to achieve it, which said that a better tool than a tool which does not make sense for the best! I believe that.

Oh....Sir, so why did you include your BVG tool in the list of neccessary equipment?
All professionals MUST HAVE: ACE tool and SoftCenter tool. But BVG tool is really very obsolete equipment. It's not abusy, it's fact.

You said:
"This is a very slow, but you can read other reader, and then use the combination to FRT"
Is it joke???

_________________
This user was found to be affiliated with Ace Lab/PC-3000. See this topic for details.

"Is it joke???"
I do not understand!

I do not want to fight you and what each person has their own things to deal with.
You can not do the things I can do it. To say?
Do not discuss this topic has nothing to do!

OK!

Chinese people believe that the skills and strength!

Why Chinese? ACE are russians. And BVG seem also to be from Russia.

_________________
This user was found to be affiliated with Ace Lab/PC-3000. See this topic for details.

Oh man....Some people don't know what are they talking about.
I think Polanwu is promoter from BVG, but he wants to hide this fact.
However, real professionals know what they should to choose
Of course all this 3 three products developed in CIS. My choice is tools from ACE (they are russians ). I suppose it is the best tools for business. But it is only IMHO.
Hey, ACE guys, you should pay me for advertisment!
I'm interesting, do some developers from ACE read this topics?

_________________
This user was found to be affiliated with Ace Lab/PC-3000. See this topic for details.

I also prefer ACE tools for my job Again advertisement! LOL Creator, we can say ACE is our debtor

_________________
This user was found to be affiliated with Ace Lab/PC-3000. See this topic for details.

Six months later, I come back to answer this question.
The past six months, I have been studying the restoration of FLASH technology. Today's world, we have common interests is not to manage technology is from where, as long as the consideration of these technologies has given us the real number of the help! Whether the company ACELAB Russia, or China's XLY companies, they have to create value for our capabilities. Therefore, I have always believed that truly is a powerful brain and experience!
We only exchange, please do not personal attacks!

how to update pc-3000 flash software? i couldn't find any update button on software. is there a downloadable version on the web?

Hi Guys,
The topic of this discussion was and still is "PC3000 Flash anyone got it?" so what is the confusion about
-I use this tool and not that tool
-This tool is highly rated than that tool
-this tool is old tech or new tech.
-this tool is made in this country and the other by another country

Ok, this is my piece to all those going back and forth and forgetting to talk about the topic that
"PLEASE KINDLY DO THE REST OF AS A FAVOR AND KEEP SHUT OR JUST MOVE ON"

This is not intended to make others mad but just to bring some sanity in the forum.

Peace Out

Send me the Price and Order

Thank you!!!!

mezrk3@web.de

Just email to AceLAb http://www.acelaboratory.com/contacts.php They inform you about prices and order

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices