Are there any tools to "reprogram" a USB memory stick to its originally size? My 128GB stick just seem to be 8MB.

/BeO

128Gb?

Did you get this from ebay by any chance? China? Was it cheap?

If so, then chances are it's a fake device.

If not, then you've probably got a controller or nand failure, and you'll need to RMA it.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Totally Agree with PCimage it must be from china only.

Yes, it was cheap, $60 and it was bought on EBAY. It was called "128GB New Leather Flash Memory Pen Stick Thumb Drive" and was labeled "Made in Japan". You may find this one and many more on EBAY and they are sold by people who doesn't know better and bought by people who is fooled like me . They think because it says 127GB free in windows it is a true value and i took a chance.

I just want to see if there is any tool to manipulate the registers in the controller in the stick to set the size to whatever it should be. I assume all those have a size like 1 or 2GB.

You can use H2testw to check size of memory. You can check signature directly on memory chip too.
Use Chipgenius to determine controller and then find correct program to reformat pen on http://www.flashboot.ru/

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices

It's from Japan, not China!

the problem your having is your card is fake its not 128gb

its just 8mb

i know this as i just checked about 1,000 of these usb pens for a person

who bought them from ebay

they are fake

bin job

they work yes but it will become corrupt and the gig is wrong
as they program them to look bigger

If u determine the correct capacity and create a partition that fits that capacity, u can use it as a smaller pendrive.

pepe

_________________
Adatmentés - Data recovery