code_slave wrote:
Seriously you should not publish pictures like this.
I am not taking the piss out of you in any way, but rather explaining what I see.
so please do not get offended.
1. I see a tin of acid based paste rosin flux, this is far to aggressive for modern electronics.
2. your air nozzle is incorrect for removing such a chip, you warm the chip, not leaf blow the shit all over the place.( equal balance heating, NOT localized package/lead interface separating stuff)
3. I see 2 hard drives in the back ground , giving me an idea of how you handle valuable stock.
4. poor working practices , paper clip for wiping rosin flux on connectors
5. possibly a pile of solder in the back ground next to a paper clip, or is it drive screws from the PCB of the disk drives? (for god sake get some small containers)
6. I do not see any anti static , even though you employ a paper clip static charge "pin injector".
7. IPA whilst always suitable for busy engineers drinking is not always suitable for cleaning PCB fluxes.
8. Perhaps a few less ketchup bottles , or at lest label them correctly.
9. your desolder pump is not an Antistatic version, nor are any of your tools.
if you are going to present such pictures of your "business" take your photos on a neutral background of say "blue" or other colored paper.
Good points
You take pictures that are detailed and in focus.
As far as recovering data, without being able to read the content of the chip ,you are not really going to get very far.
1. I see a tin of acid based paste rosin flux, this is far to aggressive for modern electronics.
Well This is a Electronic Repair Table Not a HDD Recovery Center Or Something ,We In India Use a Paste From A Company Called Quickfix And Before Delivering The Repaired Product We Clean The Same Using a PCB Cleaner .Its Too Dusty and Many Time Using Normal Paste Its Immpossible to Work And BTw this Is Not a Acidic Paste
2. your air nozzle is incorrect for removing such a chip, you warm the chip, not leaf blow the shit all over the place.( equal balance heating, NOT localized package/lead interface separating stuff)
Well Using this Tip And Many Others We Do Routine Work ,We ARe Too Experienced Then You Possible Think In Air and IRDA Products Usage AS This Is There In The Lab Since 10 Years Plus .
3. I see 2 hard drives in the back ground , giving me an idea of how you handle valuable stock.
Lol This Is Not Your Drives BTW You Cannot Comment On Anything Until You Do Not See anything ,
4. poor working practices , paper clip for wiping rosin flux on connectors
Well I Do Not Use Paper Clip I Just Clean The Same Using The Two Antistatic Bottles At The Back .
5. possibly a pile of solder in the back ground next to a paper clip, or is it drive screws from the PCB of the disk drives? (for god sake get some small containers)
WEll Do Not Comment If You Do Not Know Thats Whats there First Paper Clip And Now Pile Of Solder ,Solder Is On The Left Of This R&D Table And No Where In The Picture
6. I do not see any anti static , even though you employ a paper clip static charge "pin injector".
Nonesense ,The Mat On Which The Vase Is There Is antistatic and Also Are The Two Bottles From Plato .
7. IPA whilst always suitable for busy engineers drinking is not always suitable for cleaning PCB fluxes.
So You Think We Only Have IPA ,We Have everything
8. Perhaps a few less ketchup bottles , or at lest label them correctly.
These Are Antistatic Bottles From Plato ,This SHows That You Always Jump To Conclusions For No Reason .Lol
9. your desolder pump is not an Antistatic version, nor are any of your tools.
I Have a Desoldering Pump From Goot .
10: if you are going to present such pictures of your "business" take your photos on a neutral background of say "blue" or other colored paper.
Next Time I am Going To Call You To Take the Picture Adjest the Light the Way You Like there .
11 :As far as recovering data, without being able to read the content of the chip ,you are not really going to get very far.
Ahha So That Means That With Your Post Count And the Time You Have Been Here Only You Know How To Do It .The Data Was Recovered And The Case Is Closed Long time Back .My Tools For Flash Have PC 3000 Flash Also .I am Not Interested in Describing What I did In After The Same As I Would Like To Keep This To Myself .
Oh I Forgot :
Do Not Get Pissed Up
_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website->
http://www.chandigarhdatarecovery.com