Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
shaun
 Post subject: Sandisk Curzer Contour 4GB showing up twice?!
PostPosted: June 8th, 2010, 15:00 
Offline

Joined: July 8th, 2006, 6:18
Posts: 222
Hi there,

I have a Sandisk stick here, controller is 20-99-00136-3, flash SDTNLCHSM-4096.
The chip reads fine with soft center's nand reader, but as usual for Sandisk, it's encrypted.
It is detected by the OS, but it shows up twice, as well the USB device as the removable drive entry, both completely empty (not even 0 byte formatted size, but I/O error when tried to access).

Did anyone had this problem so far and found a solution? Is there a Sandisk tool for configuring the controller...?
Top
 Profile  
 
pcimage
 Post subject: Re: Sandisk Curzer Contour 4GB showing up twice?!
PostPosted: June 10th, 2010, 15:54 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Sandisk often has a "virtual CD" device in the controller for the hideous S3 software.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 

Main » Forums home » Flash storage, SSD

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 53 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group