January 27th, 2015, 8:57
January 27th, 2015, 9:02
January 27th, 2015, 9:44
January 27th, 2015, 10:14
January 27th, 2015, 14:10
January 27th, 2015, 17:54
January 27th, 2015, 18:19
jeremyb wrote:I'm going to make a fortune!!! Thanks for the idea... maybe for monolithics I'll offer to strip solder mask from PCB's for an additional $50
January 27th, 2015, 19:23
Q: PCB I received has a scratch / chipped transistor / discolouration
A: We manually test every PCB - chipped transistors, scratches, discolouration doesn't affect functionality. There are no “Brand New” PCBs available on the market. If it doesn't work for you, it's because firmware must be transferred, you bought a wrong board or there is another / additional issue with your hard drive.
There are no “Brand New” PCBs available on the market.
January 28th, 2015, 1:57
HaQue wrote:I will tin the solder pads for $100 and sell thin wire for $1 per 5cm length calling it "monolith data transfer wire"
January 28th, 2015, 11:58
data-medics wrote:DonorDrives.com is doing this too.
January 28th, 2015, 14:35
January 28th, 2015, 21:21
January 29th, 2015, 22:58
January 29th, 2015, 23:01
HaQue wrote:I will tin the solder pads for $100 and sell thin wire for $1 per 5cm length calling it "monolith data transfer wire"Q: PCB I received has a scratch / chipped transistor / discolouration
A: We manually test every PCB - chipped transistors, scratches, discolouration doesn't affect functionality. There are no “Brand New” PCBs available on the market. If it doesn't work for you, it's because firmware must be transferred, you bought a wrong board or there is another / additional issue with your hard drive.
So how do we transfer the firmware over????
This blindly copying HDD donor boards is wrong and unethical.There are no “Brand New” PCBs available on the market.
Straight out Lie. I can go and buy 50 of these at Officeworks right now:
http://www.ebay.com.au/itm/SanDisk-Cruzer-Glide-16GB-SDCZ60-016G-82-00515-4-SDTNQCAMA-016G-USB-2-0-Flash-/161370581164?pt=LH_DefaultDomain_0&hash=item25926fa8ac
Powered by phpBB © phpBB Group.