HDD GURU FORUMS http://forum.hddguru.com/ |
|
NAND Reader that supports H27UCG8T2MYR http://forum.hddguru.com/viewtopic.php?f=10&t=30867 |
Page 1 of 1 |
Author: | jeremyb [ April 3rd, 2015, 13:50 ] |
Post subject: | NAND Reader that supports H27UCG8T2MYR |
Does anyone know of a NAND reader that can read Hynix NAND H27UCG8T2MYR ID (ad de 94 d2) Its a problem chip w/ a standard NAND interface.. If you read it you get lots of bit errors. |
Author: | pcimage [ April 3rd, 2015, 14:13 ] |
Post subject: | Re: NAND Reader that supports H27UCG8T2MYR |
I'd like one too |
Author: | arvika [ April 3rd, 2015, 14:50 ] |
Post subject: | Re: NAND Reader that supports H27UCG8T2MYR |
I use for this memory VNR or PC3K. Usually result is perfect or almost perfect. |
Author: | jeremyb [ April 3rd, 2015, 15:15 ] |
Post subject: | Re: NAND Reader that supports H27UCG8T2MYR |
Oh joy, more stuff to buy |
Author: | pcimage [ April 3rd, 2015, 15:28 ] |
Post subject: | Re: NAND Reader that supports H27UCG8T2MYR |
Maybe I'm doing something wrong, but I don't get great results with either soft Center or pc3k reader. Don't have VNR (yet!) Having said that I haven't had any of these chips in for a while, so haven't really tested one properly with the pc3k retry feature. Sure I've got some from old cases, so will try and dig one out and test it |
Author: | arvika [ April 3rd, 2015, 16:09 ] |
Post subject: | Re: NAND Reader that supports H27UCG8T2MYR |
Let me know if you will need help. |
Author: | HaQue [ April 3rd, 2015, 18:49 ] |
Post subject: | Re: NAND Reader that supports H27UCG8T2MYR |
I had a recovery with USB having 2 chips. read it with VNR and no problems with dumps. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |