HDD GURU FORUMS
http://forum.hddguru.com/

Bricked OCZ Vertex 2 120GB
http://forum.hddguru.com/viewtopic.php?f=10&t=31591
Page 2 of 2

Author:  HaQue [ July 21st, 2015, 4:44 ]
Post subject:  Re: Bricked OCZ Vertex 2 120GB

in that case I wouldn't be using it and looking for a CP2102 based one

http://www.ebay.com/itm/Mini-CP2102-USB-2-0-to-UART-TTL-6PIN-Connector-Serial-Useful-Converter-Module-/190685792376

Author:  danikd [ July 21st, 2015, 10:02 ]
Post subject:  Re: Bricked OCZ Vertex 2 120GB

Thx I order it.
I try with conencted ground, then with separate PSU sSAAT power supply and still same garbage text.
I will wait for new adapter, but I think that is dead ...

Author:  danikd [ July 27th, 2015, 8:36 ]
Post subject:  Re: Bricked OCZ Vertex 2 120GB

Hello,

before it arrive - any idea? BEcause I think that terminal output will be same garbage text ... waht about reflow Sandforce chip? Was there any problems with Sandforce BGA connection ?
Thx.
Daniel

Author:  p30n [ February 15th, 2017, 10:23 ]
Post subject:  Re: Bricked OCZ Vertex 2 120GB

Any luck for you SSD terminal hackers?
I am struggling with the same problem, just need to unlock the panic mode via JTAG if possible, no one seems to have done it tho...?

Author:  DR-Kiev [ February 16th, 2017, 16:04 ]
Post subject:  Re: Bricked OCZ Vertex 2 120GB

p30n wrote:
Any luck for you SSD terminal hackers?
I am struggling with the same problem, just need to unlock the panic mode via JTAG if possible, no one seems to have done it tho...?

It is not that easy as you think. Panic mode is not a lock mode. JTAG interface, which you can see on PCB, is not for dealing with SF firmware.

Page 2 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/