HDD GURU FORUMS
http://forum.hddguru.com/

Is it worth trying a pinout on this MicroSD Card
http://forum.hddguru.com/viewtopic.php?f=10&t=34088		 Page 1 of 1
Author:  ddrecovery [ August 29th, 2016, 13:12 ]
Post subject:  Is it worth trying a pinout on this MicroSD Card
Just had this MicroSD Card in. My first reaction is to say its unrecoverable as it is pretty much split in half. However the crack is pretty high on the chip. Is it worth trying a pinout, or is it toast. The line on the second image is where the crack is on the other side as the coating is holding it together. I can take the surface off the pinout side if you thing that will help you decide.

Attachments:
20160829_095250_1472489686805_resized.jpg
20160829_095250_1472489686805_resized.jpg [ 1.62 MiB | Viewed 4777 times ]
20160829_095142_1472489683795_resized.jpg
20160829_095142_1472489683795_resized.jpg [ 1.55 MiB | Viewed 4777 times ]
Author:  arvika [ August 29th, 2016, 16:26 ]
Post subject:  Re: Is it worth trying a pinout on this MicroSD Card
IMHO wasting time. Is there short between VCC and GND or is card hot after plug it to adapter?
Author:  ddrecovery [ August 29th, 2016, 17:04 ]
Post subject:  Re: Is it worth trying a pinout on this MicroSD Card
arvika wrote:
IMHO wasting time. Is there short between VCC and GND or is card hot after plug it to adapter?

No short, and the card does not get hot.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/