Switch to full style
CompactFlash, SD, MMC, USB flash storage. Anything that does not have moving parts inside.
Post a reply

Is it worth trying a pinout on this MicroSD Card

August 29th, 2016, 13:12

Just had this MicroSD Card in. My first reaction is to say its unrecoverable as it is pretty much split in half. However the crack is pretty high on the chip. Is it worth trying a pinout, or is it toast. The line on the second image is where the crack is on the other side as the coating is holding it together. I can take the surface off the pinout side if you thing that will help you decide.
Attachments
20160829_095250_1472489686805_resized.jpg
20160829_095142_1472489683795_resized.jpg

Re: Is it worth trying a pinout on this MicroSD Card

August 29th, 2016, 16:26

IMHO wasting time. Is there short between VCC and GND or is card hot after plug it to adapter?

Re: Is it worth trying a pinout on this MicroSD Card

August 29th, 2016, 17:04

arvika wrote:IMHO wasting time. Is there short between VCC and GND or is card hot after plug it to adapter?

No short, and the card does not get hot.
Post a reply