All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: PC3k new card adapter
PostPosted: December 22nd, 2016, 20:36 
Offline

Joined: February 28th, 2011, 21:04
Posts: 207
Location: United Kingdom
New adapter for pc3k that has an SD and micro card slot to enable you to access them in technological mode. Anyone got any idea of how useful this will be? Don't do chip off recovery in shop at present but looking at either pc3k or Rusolut.

Obviously being able to access monos with degraded chips would be much easier but I have no feel of how likely and achievable this is in cards.


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: December 22nd, 2016, 21:14 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2520
Location: Ontario, Canada
I am wondering the same

_________________
Luke
Recovery Force Data Recovery


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: December 23rd, 2016, 2:10 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3471
Location: CDRLabs @ Chandigarh [ India ]
Luke ,
I am The One Who Was Bugging Them To Make a Blog for The Same .They Just did That -> http://blog.acelaboratory.com/pc-3000-f ... th-it.html .They Are Using Power Supply Variation control And frequency manipulations [ I wonder if we can really get Techno mode access ] to non readable Micro Sd and SD Cards

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: December 23rd, 2016, 4:51 
Offline

Joined: October 24th, 2009, 15:22
Posts: 875
Location: Poland
From my experience less than 3% cases of damaged card we can read on adapters like this (FE adapter), but this one should work in same way.

_________________
Flash Killer - everyday new resources (pinout, XOR, ECC,config) for flash devices


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: December 24th, 2016, 3:55 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
arvika wrote:
From my experience less than 3% cases of damaged card we can read on adapters like this (FE adapter), but this one should work in same way.

I Agree with you here, but It did not work with me tried more than 15 DEAD MicroSD`s/MMC

If MicroSD is DEAD/Not reading --->> Must solder wires and so...
maybe one day they will improve it and hope this will be soon.

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: December 24th, 2016, 8:38 
Offline

Joined: July 2nd, 2014, 8:05
Posts: 201
Amarbir[CDR-Labs] wrote:
They Are Using Power Supply Variation control And frequency manipulations [ I wonder if we can really get Techno mode access ] to non readable Micro Sd and SD Cards

Sounds like a new revolutionary technology :D

_________________
VISUAL NAND RECONSTRUCTOR. A big revolution in chip-off data recovery


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: December 24th, 2016, 10:06 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2798
Location: Kuwait
Sasha Sheremetov wrote:
Amarbir[CDR-Labs] wrote:
They Are Using Power Supply Variation control And frequency manipulations [ I wonder if we can really get Techno mode access ] to non readable Micro Sd and SD Cards

Sounds like a new revolutionary technology :D


A good idea, but will be much better if it SND/RCV `s or upload a loader some how to dead/damaged memories, i like the concept idea but again needs more n more research and tests.

In Sep. 8th they started talking about it.
In Dec. 8th released
After few days i got mine

and i do believe it worth alot, mainly the IDEA, i like it

we don`t do much flashes here, in fact don`t care much about it, but sometimes 3-5 cases / Year will cover the expenses/tools

the same concept as in my prev. post viewtopic.php?f=25&t=34691

Focos n Target some specific clients.
____

You find a zero-day Bug >> You report it >> people will know you >> you earn Zero cash

You find a zero-day Bug >> You re-pack n Sell it as a solution (for some clients) >> people will know you >> you earn A lot of CASH

more details will be published soon about it.


Attachments:
IMG_0166.JPG
IMG_0166.JPG [ 1.81 MiB | Viewed 11949 times ]

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: December 24th, 2016, 13:42 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3471
Location: CDRLabs @ Chandigarh [ India ]
Hello ,
I think this is a good addon ,We can now use this instead of a card reader ,We can call it a glorified card reader with few extra controls like voltage ,frequency,speed etc .Also nice that we can do monolith type work on it for eMMC cards .Though i like the idea of having dedicated Ziff type eMMC and UFS Memory Readers

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 3rd, 2017, 16:42 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2520
Location: Ontario, Canada
I received my new add-on adapter today and have been playing with it, using some older unrecoverable/declined monolithic cases. I've already found one project that it is working with, very cool.

Even if it only gets 1/10, it will be better than 0/10.

_________________
Luke
Recovery Force Data Recovery


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 3rd, 2017, 17:39 
Offline

Joined: February 28th, 2011, 21:04
Posts: 207
Location: United Kingdom
Have ordered the new pc3000 flash and some adapters including this one as my first venture into flash recovery. Hopefully worth it!


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 4th, 2017, 2:17 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3471
Location: CDRLabs @ Chandigarh [ India ]
kpeddie wrote:
Have ordered the new pc3000 flash and some adapters including this one as my first venture into flash recovery. Hopefully worth it!


Hi,
I do not see much participation by older pros in this section ,But i love if all of us new into this communicate ,I have done and solved a lot of jobs in the last 2 odd months

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 4th, 2017, 9:33 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2520
Location: Ontario, Canada
I may have spoken too soon with the one recovery...although it shows all sectors being read correctly and the FAT file structure looking great, the actual files are garbled. That said, it may be something that I can correct, once I figure out what I have control over.

_________________
Luke
Recovery Force Data Recovery


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 4th, 2017, 14:24 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3471
Location: CDRLabs @ Chandigarh [ India ]
lcoughey wrote:
I may have spoken too soon with the one recovery...although it shows all sectors being read correctly and the FAT file structure looking great, the actual files are garbled. That said, it may be something that I can correct, once I figure out what I have control over.


Damn ,
Then whats the use :(

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 16th, 2017, 12:52 
Offline

Joined: February 28th, 2011, 21:04
Posts: 207
Location: United Kingdom
Did you have any success with the card reader? Have been playing with mine with the card reader on a few abandoned recoveries and seems to read some of them but no files working so far. Not sure if its just the recoveries or many a bug with software (or me).


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 16th, 2017, 12:56 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3471
Location: CDRLabs @ Chandigarh [ India ]
kpeddie wrote:
Did you have any success with the card reader? Have been playing with mine with the card reader on a few abandoned recoveries and seems to read some of them but no files working so far. Not sure if its just the recoveries or many a bug with software (or me).


Hi,
Speak to roman.Let them tell us whats going on .To my view few of us managed to read cards but no files working

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 16th, 2017, 13:04 
Offline

Joined: February 28th, 2011, 21:04
Posts: 207
Location: United Kingdom
Went to try mount the drive to windows to see if I could scan through with r studio but not sure it did anything at all. Maybe initial software release just isnt quite there yet. Will give them a shout.


Top
 Profile  
 
 Post subject: Re: PC3k new card adapter
PostPosted: January 16th, 2017, 17:28 
Offline

Joined: February 28th, 2011, 21:04
Posts: 207
Location: United Kingdom
Going to try a known good card tomorrow and see what happens


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 29 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group