I have a flash drive with broken socket I have a usb2 socket but I dont know the pin out, could some one please point
| Attachments: |
|
Capture.JPG [ 30.84 KiB | Viewed 7514 times ] |
| HDD GURU FORUMS http://forum.hddguru.com/ |
|
| USB 3 flash drive http://forum.hddguru.com/viewtopic.php?f=10&t=34913 |
Page 1 of 1 |
| Author: | reef [ January 31st, 2017, 14:30 ] | ||
| Post subject: | USB 3 flash drive | ||
I have a flash drive with broken socket I have a usb2 socket but I dont know the pin out, could some one please point
|
|||
| Author: | LarrySabo [ January 31st, 2017, 16:51 ] |
| Post subject: | Re: USB 3 flash drive |
If you didn't take a high-res picture of the assembled parts you may need an identical unit to determine what goes where. Usually it's straightforward, as one outside pin is ground, the opposite is 5v and the data lines are in the middle. Here are the pinouts for the connector. |
|
| Author: | reef [ January 31st, 2017, 17:24 ] |
| Post subject: | Re: USB 3 flash drive |
Thank you, I think I didn't explain correct  is a USB3 but I have a USB2 socket, USB3 has eight pads, my socket has only 4 cables, where do I need to solder the 4 cables
|
|
| Author: | fzabkar [ January 31st, 2017, 17:42 ] |
| Post subject: | Re: USB 3 flash drive |
http://pinoutguide.com/PortableDevices/ ... nout.shtml |
|
| Author: | LarrySabo [ January 31st, 2017, 18:21 ] |
| Post subject: | Re: USB 3 flash drive |
LOL, that's why there are so many pads! I have a cold and am a little slower than usual today. That and I'm just stupid. |
|
| Author: | fzabkar [ January 31st, 2017, 18:28 ] |
| Post subject: | Re: USB 3 flash drive |
http://pinoutguide.com/Slots/usb_3_0_co ... nout.shtml (9-pin) |
|
| Author: | reef [ February 1st, 2017, 13:34 ] |
| Post subject: | Re: USB 3 flash drive |
Thank you Mr LarrySabo and Fzabkar I was able to recover my flash with the info you posted - Cheers!! 
|
|
| Author: | LarrySabo [ February 1st, 2017, 15:08 ] |
| Post subject: | Re: USB 3 flash drive |
Terrific! Congrats. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|