HDD GURU FORUMS
http://forum.hddguru.com/

OCZ Arc 100 SSD Read Only
http://forum.hddguru.com/viewtopic.php?f=10&t=34978		 Page 1 of 1
Author:  dick [ February 12th, 2017, 7:50 ]
Post subject:  OCZ Arc 100 SSD Read Only
OCZ Arc 100 ssd 240gb with 1.01 firmware.

This ssd drive appears to be working in read only mode.
I have tried connecting it to various motherboards using both ahci and ide modes.
Drive is correctly seen by the bios but causes very slow boot (if at all).
I had to connect power after system boot to access data.
All data was easily retrieved.

I am asking if this drive can be fixed or is it just trash?
Author:  einstein9 [ February 12th, 2017, 9:27 ]
Post subject:  Re: OCZ Arc 100 SSD Read Only
try to RE-FLASH the FW and see how it goes.

Note: Backup your files 1st.
Author:  fzabkar [ February 12th, 2017, 16:20 ]
Post subject:  Re: OCZ Arc 100 SSD Read Only
Could we see a SMART report?
Author:  dick [ February 13th, 2017, 7:10 ]
Post subject:  Re: OCZ Arc 100 SSD Read Only
OCZ-ARC100 A22L1061507007256
-------------------------------------------------------------------------
ID Name Value Worst Tresh Raw Health
-------------------------------------------------------------------------
5 Reallocated sector count 0 0 0 0 •
9 Power-on time 100 100 0 5750 •••••
12 Start/stop count 100 100 0 1174 •••••
171 unknown attribut 100 100 0 80919376 •••••
174 unknown attribut 100 100 0 153 •••••
195 Hardware ECC recovered 100 100 0 0 •••••
196 Reallocated event count 100 100 0 0 •••••
197 Current pending sectors 100 100 0 0 •••••
208 Spin buzzes count 100 100 0 136 •••••
210 Vibration during write 100 100 0 0 •••••
224 Load friction 100 100 0 1 •••••
233 unknown attribut 96 96 0 96 ••••
241 unknown attribut 100 100 0 7231 •••••
242 unknown attribut 100 100 0 8434 •••••
249 unknown attribut 100 100 0 408075480 •••••
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/