NAND Flash Reader CONFIG

[Flashguys]

Some times NAND FLASH reader config if wrong ， like this case .

I up some chips config you can testing.

FE-CHIP-CONFIG.rar

(3.94 KiB) Downloaded 1611 times

[jeremyb]

Block not found is because the NAND controller either didn't write that block to NAND or the block assembler can't locate that block (eg: sometimes update blocks use a different XOR than committed blocks ie: Phison)).

Using a different NAND CFG shouldn't affect Block Not Found unless the block count on TLC NAND is wrong but that's rarely the case.