HDD GURU FORUMS http://forum.hddguru.com/ |
|
NAND Flash Reader CONFIG http://forum.hddguru.com/viewtopic.php?f=10&t=35243 |
Page 1 of 1 |
Author: | Flashguys [ April 11th, 2017, 21:59 ] |
Post subject: | NAND Flash Reader CONFIG |
Some times NAND FLASH reader config if wrong , like this case . Attachment: Attachment: I up some chips config you can testing. Attachment:
|
Author: | jeremyb [ April 15th, 2017, 17:55 ] |
Post subject: | Re: NAND Flash Reader CONFIG |
Block not found is because the NAND controller either didn't write that block to NAND or the block assembler can't locate that block (eg: sometimes update blocks use a different XOR than committed blocks ie: Phison)). Using a different NAND CFG shouldn't affect Block Not Found unless the block count on TLC NAND is wrong but that's rarely the case. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |