HDD GURU FORUMS http://forum.hddguru.com/ |
|
z400s possible memory damage http://forum.hddguru.com/viewtopic.php?f=10&t=35786 |
Page 1 of 1 |
Author: | alemmat [ September 5th, 2017, 9:46 ] |
Post subject: | z400s possible memory damage |
Hello every one i have this case is a sandisk ssd z400s the controller is a sm2246xt, i am working this case with a pc3k ssd i can put the drive in safe mode but the memorys is seriously damage. When i create the task and try to rebuild the trasnlator this take a very long time the all procces take 30-45 minutes. In the beginning of procces the pc3k ssd can read in a few pages without error, but after one or two minutes in the log you only can see this error: H2F Chunk checking error (Block: 0x06E3; Page: 0x0DE0) H2F Chunk checking error (Block: 0x06E3; Page: 0x0DE1) i believe the memorys is seriously damage but is possible do something? any help i am very greatful |
Author: | Flashguys [ September 8th, 2017, 5:22 ] |
Post subject: | Re: z400s possible memory damage |
alemmat wrote: Hello every one i have this case is a sandisk ssd z400s the controller is a sm2246xt, i am working this case with a pc3k ssd i can put the drive in safe mode but the memorys is seriously damage. When i create the task and try to rebuild the trasnlator this take a very long time the all procces take 30-45 minutes. In the beginning of procces the pc3k ssd can read in a few pages without error, but after one or two minutes in the log you only can see this error: H2F Chunk checking error (Block: 0x06E3; Page: 0x0DE0) H2F Chunk checking error (Block: 0x06E3; Page: 0x0DE1) i believe the memorys is seriously damage but is possible do something? any help i am very greatful some times H2F error is not chip damage , H2F is Index table damage. you can reade chip use FLASH EXTRATOR find ecc if ok . |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |